 Color-Crete integral coloring system for concrete is
concentrated color admixture that mixes right in to transform ordinary concrete into
surfaces or structures that stand out to be noriced or blend in with surroundings.
Color-Crete is as durable and lasts as long as concrete. Available in 30 standard colors,
Color-Crete is aslos available in custom colors and can be custom matched to any theme or
decor. As the leading manufacturers the most complete and versatile line of decorative
concrete products in the world. Providing the architect, builder, design professional, and
specifier with the most beautiful, cost effective decorative concrete solutions in the
industry.
Basic Use
Color-Crete is designed to be used in all cementitious
materials, producing unlimited color effects. The primary applications are cast-in-place.
slab on grade, precast, tilt-up, concrete pavers and roof tiles. Color-Crete also can be
used in stucco, cast stone and plaster.
Finishes
Color-Crete surfaces can be finished with
stamped-patterned, broomed, troweled, salt finished, sand blasted, exposed aggregate or
any number of other appealing textures. Cast-in-place, pre-cast, and tilt-up structures
can be finished with forms and form liners, grinding, sand blasting or bush-hammering and
polishing as well as exposed aggregate. The color-Crete concrete coloring system gives you
the freedom of many different finishes.
Applications
Common applications for Color-Crete are streets, sidewalks,
plazas, parks, medians, walls, pool decks, subdivision entryways, golf course cart paths,
driveways, or any other cemetitious based surface or structure where color and design are
desired.
Composition
Increte Systems colors are pure synthetic iron oxide
pigments, manufactured to the highest standards. They are high strength and uniform in
color while exceeding ASTM C-979 specifications fro intefrally colored concrete.
Color-Crete colors are light-fast, lime-proof and totally weatherproof, provideing a
permanent colorfast solution.
Packaging
Increte Systems offers a variety of packaging. Batch
-Ready© disintigrating bags containa precise measurement of pigment and are added to a
Ready-Mix drum eliminating waste and human error. Batch-Ready© will disintegrate in the
truck while providing totally uniform color, thus reducing color variations.
Note: Batch-Ready© bags are available in both 5 sack and 6
sack pre-measured bags. Measurement on front of color chart indicates per sack weights.
Specify the number of sacks being used when placing the order. Standard 50 lb. multiwall
bags also are a available for all Color-Crete colors.
Increte Systems will custom package all colors from a few
ounces up to super sacks of 2,000-3,000 lb. weights.
Curing
Color-Crete flatwork should be cured with Increte Systems
Color-Crete Cure & Seal. Color-Crete Cure & Seal coats the surface with a
specially formulated coat of color and curing membrane.
Quality Tips
For best results, insist on genuine Increte Systems
products, and maintain uniformity in weather conditions, materials, curing, and
workmanship throughout the project. Most importantly,a good quality job starts with the
wuality of the concrete. Specify accordingly. Contractors are independently owned and have
no affiliation with Increte Systems Inc.
Specify Color-Crete
By name ________________and pigment # _______________. As
manufactured by Increte at the rate of ____________ pounds per 94 lb. of cement.
Technical Services - Custom Colors and Matching
Services
The Increte Systems color service laboratory is available
to provide expert assistance for yoiur color needs. Please contacts your representative
and indicate mix design along with sample of desired color that is to be produced.
No change for color matching.
Increte Systems, Inc.
8509 Sunstate St.
Tampa, FL 33634 U.S.A.
Tel: (813) 886-8811
(800) 752-4626
Fax: (813) 886-0188
www.increte.com
Distributed by:
© 1999 Color-Crete and Batch-Ready© bags are
registered trademarks of Increte Systems, Inc.
|
