The beam wraps complement the column covers. They can also function as stand-alone treatments to enhance exposed beams, entranceways and other areas. Like the column covers, the beam wraps are competitively priced and easy to install.

Beam wraps and column covers are custom-fabricated in aluminum or stainless steel. They can be standard-finished or custom-finished to meet any practical or aesthetic requirement.


Irvine Theatre, Irvine, California

SPECIFICATIONS
SCOPE
Furnish column covers as specified herein where shown on drawings for installation without exposed fasteners, including trim and attachments. Column covers shall beg removable.

SUBMITTALS
1. Manufacturer's product data
2. Complete drawings
3. Installation instructions

MANUFACTURER
Industrial Louvers, Inc.

MATERIALS
1. Aluminum - 3003, 5005 or 5052 alloys
2. Stainless steel - 304 alloy
3. Finishes -  free of scratches and blemishes
     a. KynarŪ 500/Hylar™ 5000 fluoropolymer
     b. Baked acrylic enamel

FABRICATION
1. All fasteners to be concealed.
2. Tolerances as specified.
3. Each course fabricated in 2 or more sections.
4. 6" minimum radius.
5. 12'0" maximum height.

PROTECTION
1 . Package with protective coatings, supports and packaging to prevent twisting, bending, abrasion , deformation and finish damage.
2. Prevent contact with materials and environment which may cause finish discoloration, stains or damage.

INSTALLATION
1. Install in accordance with manufacturer's instructions and approved shop drawings.
2. Protection for finishes from damage during and after installation shall be by installer and general contractor.