Saving a World of Energy

PRODUCT DATA SHEET

SUPER R™ DIAMOND (Residential)

PRODUCT: Two-Sided reflecting 99% pure aluminum foil with reinforced scrim
WEIGHT: 14.3 lb M/sf
TENSILE STRENGTH: Test Method ASTM D-882
Machine Direction: 14.9 lb/in width
Cross Direction: 5.2 lb/in width
FLAME SPREAD: 0*
SMOKE DEVELOPMENT: 5*
WATER VAPOR PERMEABILITY: 60 g/m² /24hr***
THERMAL PROPERTIES: Emissivity 0.03**** (Reflects 97% of Infrared Energy)

SUPER R™ PREMIUM (Commercial)

PRODUCT: Two-sided reflecting 99% pure aluminum foil with poly fabric
WEIGHT: 16.5 lb M/sf
TENSILE STRENGTH: Test Method ASTM D-882 Machine Direction: 13.5 lb/in width Cross Direction: 15.0 lb/in width
FLAME SPREAD: 5*
SMOKE DEVELOPMENT: 10*
WATER VAPOR PERMEABILITY: 60g/m²/24hr***
THERMAL PROPERTIES: Emissivity 0.03**** (Reflects 97% of Infrared Energy)

SUPER R™ PLUS (Industrial)

PRODUCT: Two-sided reflecting 99% pure aluminum foil with woven polyolefin
WEIGHT: 23.8 lb M/sf
TENSILE STRENGTH: Test Method ASTM D-882 Machine Direction: 64.0 lb/in width Cross Direction: 30.0 lb/in width
FLAME SPREAD: 10 *
SMOKE DEVELOPMENT: 10*
WATER VAPOR PERMEABILITY: 60g/m²/24hr***
THERMAL PROPERTIES: Emissivity 0.03**** (Reflects 97% of Infrared Energy)

UNITED STATES TESTING COMPANY, INC.
* ASTM Test Method E-84-8I A
** ASTM Test Method E-84-95
*** ASTM E-96 Method A
**** ASTM E-408

TEMPSHIELD™ SINGLE BUBBLE SINGLE SIDED

PRODUCT: One layer of 3/16" bubble wrap material laminated to one layer of foil
CONTACT TEMPERATURE RANGE: -60 degrees F to 180 degrees F (-51 degrees C to 82 degrees C)
TOTAL NOMINAL THICKNESS:  3/16" or .1875 minimum.
WATER VAPOR TRANSMISSION: .04 perms****
PUNCTURE RESISTANCE: 60 lbs. per sq. inch
PLIABILITY: No Cracking
LINEAR SHRINKAGE: None
REFLECTIVITY: 97%
EMITTANCE: 0.032*****

TEMPSHIELD™ SINGLE BUBBLE

PRODUCT: One layer of 3/16" barrier bubble film laminated between two layers of foil
CONTACT TEMPERATURE RANGE: -60 degrees F to 180 degrees F (-51 degrees C to 82 degrees C)
WEIGHT: .811 oz. per sq. ft.
THICKNESS: 3/16 inch nominal
WATER VAPOR TRANSMISSION: .04****
PUNCTURE RESISTANCE: 108.65 inch/lbs***
PLIABILITY: No Cracking
LINEAR SHRINKAGE: None
FLAME SPREAD: 15**
SMOKE DEVELOPMENT: 10**
FIRE RATING: Class A/Class 1
MOTOR VEHICLE SAFETY STANDARD 302: Zero surface burn rate
REFLECTIVITY: 97%
EMITTANCE: 0.032*****

TEMPSHIELD™ DOUBLE BUBBLE

PRODUCT: Two layers of 3/16" barrier bubble film laminated between two layers of foil
CONTACT TEMPERATURE RANGE: -60 degrees F to 180 degrees F (-51 degrees C to 82 degrees C)
WEIGHT: 1.25 oz. per sq. ft.
THICKNESS: 3/8 inch nominal
WATER VAPOR TRANSMISSION: .04****
PUNCTURE RESISTANCE: 344.5 inch/lbs***
PLIABILITY: No Cracking
LINEAR SHRINKAGE: None
FLAME SPREAD: 15**
SMOKE DEVELOPMENT: 15**
FIRE RATING: Class A/Class 1
MOTOR VEHICLE SAFETY STANDARD 302: Zero surface burn rate
REFLECTIVITY: 97%
EMITTANCE: 0.032*****

UNITED STATES TESTING COMPANY, INC.
* ASTM Test Method E-84-81 A
** ASTM Test Method E-84-95
*** ASTM Test Method D-781
**** ASTM E-96 Method A
***** ASTM E-408


TYPICAL THERMAL VALUES FOR TEMPSHIELD BUBBLE PRODUCTS

* Thermal resistance measurements have been made according to the most recent test revisions using a calibrated hot box operated in accordance with ASTM C 976. R values were measured for product installed to form two 2.5 inches wide air spaces in a nominal 2 inch x 6 inch framing set 24 inches "on center." Analysis of results was done in accordance with ASTM C 1224. The R-values observed are highly dependent on method of installation.

** R-values calculated on a typical wall cavity system including 3/4 inch interior and exterior plywood, studs on 24 inch centers, and naturally occurring air films.