1. Nylon Cover

The low profile, nylon cover is rated for a 2500 pound live wheel load. Six bolts are used to cover. Optional, lock-
able, internal tether prevents unauthorized access.

2. Ultrasonic Level Control

The level controller is a non-contact ultra sonic sensor with no moving parts, is virtually maintenance-free with million cycle reliability.

3. Flex Connector

A four foot flexible polyethylene pipe compensates for misalignment between tank and service line and protects the service line connection from frost heave and tank settlement. The connector is fitted with swaged-on PVC couplings, providing for a solvent welded transition to PVC pipe, valves or fittings.

4. Anti-Shear Discharge

Integrally molded, reverse boss protects the discharge service line connection from the shear forces generated by backfill and tank settlement.

5. Vertical Inlet

The vertical inlet allows for easy up and down and side to side inlet pipe adjustments. The downward inlet also stirs up any solids on the bottom of the tank and directs solids to the grinding plane.

6. Electrical Conduits

Flexible PVC electrical conduits are factory installed to meet the National Electrical Code for direct bury cables. Factory installation saves time and money and also ensures a water-tight cable entry into the control panel located in the shallow dry well.

7. Shallow Dry Well

Integrally molded dry well houses the electrical and sensor junction box, isolation valve and ultrasonic level sensor. Sealed vacuum- formed lid prevents exposure to sewage and odors.

8. Control Box

Electrical connections for the pump and level sensor are protected by a NEMA 6, submersible enclosure with a clear lid for viewing the system status LEDs.

9. Roto-Molded Tank

The large capacity, polyethylene tank provides additional reserve capacity during power outages and requires fewer pump starts, thus maximizing pump life. The integrally molded tank has no welded seams to fail and eliminates the need for fastener penetrations.

10. Pump Quick Disconnect

The quick disconnect system for easy pump removal includes the lift cable, guide rail , hydraulic sealing flange and the quick disconnect power cord.

11. Grinder Pump

Self-regulating two HP centrifugal grinder pump is non-overloading and fully functional from minus 60 to 106 feet of head pressure.