architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Introsul   Introsul  

Introsul - Page 20

   

Introsul

Products by

introsul marble bathroom concepts

Technical Data

 

Property Typical Results Test
Workmanship & Finish No Cracks, chips, or blisters ANSI Z-124.3
Structural Integrity, Point Impact Loads No Fracture ANSI Z-124.3
Stain Resistance No Staining ANSI Z-124.3
Abrasion Resistance Loss of white light reflectance less than 2% at 10,000 cycles ANSI Z-124.3
Cigarette Test No ignition or progressive glow of the surface during or after contact with lighted cigarettes.  Any resulting damage is easily repaired using abrasive and polishing compounds to aproximate the original finish. ANSI Z-124.3
Chemical Resistance Test Finish unaffected... ANSI Z-124.3
Hydro-Thermal Shock Test No evidence of cracking or crazing ANSI Z-124.3
Flammability Test Flame Index 5.95 ASTM-E-162

All test results meet or exceed UPC, NAHB, and HUD Bulletin NO. 73 A requirements.

HOW TO SPECIFY PRODUCTS BY INTROSUL

Vanity tops, bath enclosures, wainscoting and all other related products shall be made of introsul, as manufactured by Introsul, Inc.  of Perry, Georgia.  Color and pattern shall be selected by the architect and physical properties shall conform to manufacturer's standard specifications, which meet or exceed standards as prescribed by the American National Standards Institute, Inc., as promulgated in ANSI Z-124.3

103 industrial park drive     p.o.box 1393    perry, ga. 31069

phone 912-987-3185 - fax 912-987-4067



Request for Information / Request a Catalog from Introsul
 
 
 
To request more information from Introsul, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.