Synthetic Marble Vanity Tops, Counter Tops, window Stills, Tub Surrounds, Shower Pans, Miscellaneous Configurations, and Vitreous China Undermount Bowls.

The following model specification section may be located in Division 6, Wood and Plastics, Division 9, Finishes or Division 10, Specialties.

PART 1  GENERAL

1.1 QUALITY ASSURANCE

A. Synthetic (man-made) Marble Products: Provide synthetic marble products as specified herein bearing manufacturer's publishing limited warranty for the term of five (5) years.

PART 2 PRODUCTS

2.1 PHYSICAL CHARACTERISTICS

A. Synthetic (man-made) Marble Products: Provide synthetic marble products of sizes and configurations as indicated on the Drawing, in compliance with appropriate codes, and possessing the following physical and technical characteristics:

1. All products shall have a satin or mate finish on all exposed surfaces.

a. Slick, or glossy gel-coat finishes will not be accepted.

2. All products must be provided in accordance with the following reference standards.

a. ANSI Z-124.3 - With regard to workmanship

b. ANSI Z 124.3 - With regard to finished quality

c. ANSI Z 124.3 - With regard to structural integrity

d. ANSI Z 124.3 - With regard to stain resistance

e. ANSI Z 124.3 - With regard to abrasion resistance

f. ANSI Z 124.3 - With regard to chemical resistance

g. ANSI Z 124.3 - With regard to cigarette/flame resistance

h. ASTM D - 2565-79 - With regard to colorfastness