10. Vanity counter top units shall be manufactured 'oversized' to accommodate constriction tolerances.  All vanity counter tops and ancillary materials shall be cut-to-fit in the field.

2.4 UNDERMOUNT VITREOUS CHINA BOWLS

A. Vitreous China Lavatory Bowls: Vitreous china lavatory bowls shall be provided by the Vanity counter top manufacturer to assure compatibility with finished vanity counter top bowl cutout.

1. Vitreous china lavatory bowls shall have standard one and five-eighths inch (1 5/8") diameter drain hole.

2. Vitreous china lavatory bowls shall have emergency overflow in accordance with applicable codes.

2.5 TUB AND SHOWER SURROUNDS

A. Tub and Shower Surround Units: Provide, where indicated on the Drawings, synthetic marble tub surround units in accordance with the criteria indicated above and possessing the following physical characteristics:

1. Tub surrounds units shall be of one-quarter inch (1/4") panels, consisting of the following:

a. Tow panels for the rear wall of width required.

b. One ten inch (10") wide accent strip (seam cover) to cover the seam between the two panels for the rear wall indicated above.

c. One panel for the wet wall, to be drilled in the field to accommodate mixing valve and shower head.

d. One panel for the wall opposite the wet wall.

e. Two three-quarters inch (3/4") by two inch (2") by ninety-six (96") trim strips.

f. Two surface-mounted soap dishes to be mounted in locations indicated on the Drawings.

g. All materials shall be of height indicated on the Drawings.

2. Tub surround units shall be manufactured 'oversized' to accommodate construction tolerances.  All tub surround units and ancillary materials shall be cut-to-fit in the field.

3.  All grab bars, curtain rods, and other accessories shall be attached, through the tub surround materials and into blocking within the walls, by others.

4. Tub surround units shall match vanity top materials in color unless noted otherwise by Architect, Interior Designer or Owner.