architecture - engineering - construction
ITW Buildex
Buildex Products Catalog
Teks Self Drilling Fasteners- Page 6
Buildex Products Catalog
| TEKS® |
SELF -DRILLING FASTENERS |
Product Report No.81102 |
Selector Guide
 |
Part No. |
Description |
Head Style |
Drill Point |
Drill & Tap Capacity |
Max. Material Attachment |
Applications |
| 1134000 |
12-21 x 3/4'' |
HWH |
#3 |
.036 - .210 |
.290 |
- Roof deck to steel framing
- Wall panel to girt.
- Duct work to steel framing.
- Accessories to steel framing.
- Clip to steel framing.
- Retrofit framing.
|
| 1136000 |
12-14 x 1'' |
HWH |
#3 |
.036 - .210 |
.525 |
| 1120000 |
12-14 x 1-1/4'' |
HWH |
#2 |
.036 - .210 |
.580 |
| 1123000 |
12-14 x 1''-1/2'' |
HWH |
#2 |
.036 - .210 |
.810 |
| 1140000 |
12-14 x 2'' |
HWH |
#3 |
.036 - .210 |
1.525 |
| 1553000 |
12/14 x 2-1/2'' |
HWH |
#3 |
.036 - .210 |
2.025 |
| 1143000 |
12/14 x 3'' |
HWH |
#3 |
.036 - .210 |
2.525 |
| 1146000 |
12/14 x 4'' |
HWH |
#3 |
.036 - .210 |
3.425 |
| 1147000 |
1/4-14 x 3/4'' |
HWH |
#3 |
.036 - .210 |
.210 |
| 1149000 |
1/4-14 x 1'' |
HWH |
#3 |
.036 - .210 |
.460 |
| 1150000 |
1/4-14 x 1/4'' |
HWH |
#3 |
.036 - .210 |
.710 |
| 1152000 |
1/4-14 x 1-1/2'' |
HWH |
#3 |
.036 - .210 |
.960 |
| 1155000 |
1/4-14 x 2'' |
HWH |
#3 |
.036 - .210 |
1.460 |
| 1554000 |
1/4-14 x 2-1/2'' |
HWH |
#3 |
.036 - .210 |
1.960 |
| 1157000 |
1/4-14 x 3'' |
HWH |
#3 |
.036 - .210 |
2.460 |
| 1304000 |
1/4-14 x 4'' |
HWH |
#3 |
.036 - .210 |
3.460 |
| |
All available with bonded washer. |
 |
1586000 |
1/4-14 x 3/4'' |
HWH |
#3 |
.036 - .210 |
.250 |
- Commercial overhead steel doors, hinges & latches.
|
| 1587000 |
1/4 -14 x 1'' |
HWH |
#3 |
.036 - .210 |
.500 |
Performance data
| PULLOUT VALUES
(average lbs. ultimate) |
| Fastener |
Steel Gauge |
| Dia |
Pt. |
26 |
24 |
22 |
20 |
18 |
16 |
14 |
12 |
3/16 |
| 12 |
2 |
156 |
243 |
283 |
375 |
605 |
848 |
1181 |
1856 |
3520 |
| 3 |
142 |
211 |
289 |
341 |
551 |
757 |
1063 |
1631 |
2998 |
| 1/4 |
3 |
141 |
231 |
293 |
346 |
613 |
880 |
1145 |
1858 |
4550 |
| FASTENER
VALUES |
| Fastener |
Tensile (lbs.min) |
Shear (avg.lbs.ult.) |
Torque (min.in.lbs) |
| 12 -14 |
2778 |
2000 |
92 |
| 1/4 -14 |
4060 |
2600 |
150 |
| SHEET STEEL
GAUGES |
| Gauge No. |
12 |
14 |
16 |
18 |
20 |
22 |
24 |
26 |
| Decimal Equivalent |
.105'' |
.75'' |
.060'' |
.48'' |
.036'' |
.030'' |
.024'' |
.018'' |
| SHEAR
VALUES (average lbs. ultimate) |
| Fastener |
Steel Gauge
(average lbs. ultimate) |
| Dia |
Pt. |
26 |
24 |
22 |
20 |
18 |
16 |
14 |
12 |
| 12 |
2 |
365 |
600 |
623 |
898 |
1370 |
1758 |
2138 |
2202 |
| 3 |
|
|
|
769 |
1358 |
1620 |
1970 |
1986 |
| 1/4 |
3 |
|
|
|
930 |
1442 |
2100 |
2584 |
2650 |
The values listed are ultimate averages achieved under
laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety
factors should be applied to these values for design purposes.
Installation Guidelines
 |
A standard screwgun with a depth
sensitive nosepiece should be used to install teks. For optimal fastener performance, the
screwgun should be a minimum of 4 amps and have a RPM range of 0-2000. |
|
Adjust the screwgun nose piece
to properly seat the fastener. |
|
New magnetic sockets must be
correctly set before use. remove chip build-up as needed. |
|
The fastener is fully seated
when the head is flush with the work surface. |
|
Overdriving may result in
torsional failure of the fastener or stripout of the substrate. |
|
The fastener must penetrate
beyond the metal structure a minimum of 3 pitches of thread. |
 |
Teks®,
Climaseal® and Building Ideas the
Work™ are trademarks of ITW Buildex and Illinois Tool Works Inc. |
BUILDING IDEAS THAT WORK™ 1349 West
Bryn Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com |
©1999
Illinois Tool Works,. |
|
