Buildex Products Catalog (ITW Buildex)

MAXISEAL®

INTEGRAL WASHER

Product Report No.81107

Selector Guide

Part No.	Description	Head Style	Drill Point	Drill & Tap Capacity	Max. Material Attachment	Applications
1376000	10-16x3/4''	HWH	#3	.036-.175	.325	Roof and wall panel to steel framing. Panel over insulation to steel framing.
1023000 1026000 1029000 1428000	12-24 x 3/4'' 12-24 x 1'' 12-24x1-1/4'' 12-24x1-1/2''	HWH HWH HWH HWH	#3 #3 #2 #2	.036-.210 .036-.210 .036-.210 .036-.210	.260 .310 .560 .810
173000 1389000	12-24 x 7/8" 1/4-14x7/8''	HWH HWH	#4 #1	.125 - .250 .024-.095	.295 .320	Roof and wall panel to bar joist or structural Stitching roof,wall, facia, eave panels or gutter straps.
1042000 1044000 1048000 1712000	1/4-14 x 3/4'' 1/4-14 x 1'' 1/4-14x1-1/2'' 1/4-14 x 3"	HWH HWH HWH HWH	#3 #3 #3 #3	.036-.210 .036-.210 .036-.210 .036-.210	.150 .400 .810 2.40	Sheet or accessories with up to 6'' blanket insulation to steel framing.
1060000 1060000	1/4-14x3/4'' 17-14 x 1''	HWH HWH	AB AB		.435 .685	Replacement screw for 12 and 1/4'' diameter fasteners.

Performance Data

PULLOUT VALUES (average lbs. ultimate)
Fastener			Steel Gauge
Dia	Pt.	26	24	22	20	18	16	14	12	3/16	1/4
10	3	124	208	266	299	499	708	967	1474
12	2	156	243	283	375	605	848	1181	1856	3520
	3	142	211	289	341	551	757	1063	1631	2998
	4						697	986	1532	3485	4013
1/4	1	208	329	428	562	800	1151	-	1858	4550
	3	141	231	293	346	613	880	1145	1690	3446
	AB	235	365	496	597	702	926	1180	1716	3523
17	AB	225	261	350	442	553	752	1122

FASTENER VALUES
Fastener (dia-tpi)	Tensile (lbs.min)	Shear (avg.lbs.ult.)	Torque (min.in.lbs)
10-16	1936	1400	61
12-24	2778	2000	92
1/4-14	4060	2600	150
17-14	5300	3200	180

SHEET STEEL GAUGES
Gauge No.	12	14	16	18	20	22	24	26
Decimal Equivalent	.105''	.75''	.060''	.48''	.036''	.030''	.024''	.018''

SHEAR VALUES (average lbs. ultimate)
Fastener	Steel Gauge (average lbs. ultimate)
Dia	Pt.	26	24	22	20	18	16	14	12
10	3				728	1266	1540	1552
12	2	365	600	623	898	1370	1758	2138
	3				769	1358	1620	1970	1986
	4	-	-	-	-	-	-	-	2048
1/4	1	511	849	885	1244	1765
	3				930	1442	2100	2584	2650
	AB	422	482	669	889	1157
17	AB	459	745	989	958	1415

The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.

Installation Guidelines

	A standard screwgun with a depth sensitive nosepiece should be used to install teks. For optimal fastener performance, thru screwgun should be a minimum of 4 amps and have a RPM range of 0-2000.
	Adjust the screwgun nose piece to properly seat the fastener.
	New magnetic sockets must be correctly set before use. Remove clip build up as needed.
	Worn or damaged bit tip should be replaced.
	Overdriving may result in torsional failure of the fastener or stripout of the substrate.
	The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

Teks^®, Maxiseal^®, Climaseal^® and Building Ideas that work™ are trademarks of ITW Buildex and Illinois Tool Works Inc.

BUILDING IDEAS THAT WORK™

1349 West Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com

Maxiseal - Page 16