Buildex Products Catalog (ITW Buildex)

TEKS^{^®}

EXTERIOR RIGID INSULATION FASTENERS

Product Report No.81109

Selector Guide

Part No.

Description

Head Style

Drill Point

Drill & Tap Capacity

Max. Material Attachment

Applications

1034000

1036000

1038000

1040000

Maxiseal^®

12-14x1-7/8''

12-14x2-3/8''

12-14x3-1/4''

12-14 x 4''

HWH

.036-.210

3/4'' to 1''

1-1/8'' to 1-1/2''

1-5/8'' to 2-3/8''

2-1/8'' to 3''

Roof and wall panel over rigid insulation to steel framing.
Roof panel over spacer block and insulation to eave purlin.

1169200

1170200

1171200

1172200

Scots^®

12-14x1-7/8''

12-14x2-3/8''

12-14x3-1/4''

12-14 x 4''

HWH

.036-.210

3/4'' to 1''

1-1/8'' to 1-1/2''

1-5/8'' to 2-3/8''

2-1/8'' to 3''

Performance Data

PULLOUT VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia	Pt.	26	24	22	20	18	16	14	12	3/16
12	3	142	211	289	341	551	757	1063	1631	2998

FASTENER VALUES
Fastener (dia-tpi)	Tensile (lbs.min)	Shear (avg.lbs.ult.)	Torque (min.in.lbs)
12-14	2778	2000	90

SHEET STEEL GAUGES
Gauge No.	12	14	16	18	20	22	24	26
Decimal Equivalent	.105''	.75''	.060''	.48''	.036''	.030''	.024''	.018''

SHEAR VALUES (average lbs. ultimate)
Fastener	Steel Gauge (average lbs. ultimate)
Dia	Pt.	26	24	22	20	18	16	14	12
12	3				769	1358	1620	1970	1986

The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.

Installation Guidelines

	A standard screwgun with a depth sensitive nosepiece should be used to install teks. For optimal fastener performance, thru screwgun should be a minimum of 4 amps and have a RPM range of 0-2000.
	Adjust the screwgun nose piece to properly seat the fastener.
	New magnetic sockets must be correctly set before use. Remove clip build up as needed.
	Overdriving may result in torsional failure of the fastener or stripout of the substrate.
	The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

Teks^®, Scots^®, Maxiseal^®, Climaseal^® and Building Ideas the Work™ are trademarks of ITW Buildex and Illinois Tool Works Inc.

BUILDING IDEAS THAT WORK™

1349 West Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com

Teks - Page 20