architecture - engineering - construction
ITW Buildex
Buildex Products Catalog
Teks - Page 22
Buildex Products Catalog
| TEKS® |
INTERIOR INSULATION FASTENERS |
Product Report No.81110 |
Selector Guide
 |
Part No. |
Description |
Head Style |
Drill Point |
Drill & Tap
Capacity |
Max. Material Attachment |
Applications |
| 1033200 1035200
1037200
1039200 |
12-14x1-7/8'' 12-14x2-3/8''
12-14x3-1/4''
12-14 x 4'' |
HWH HWH
HWH
HWH |
#3 #3
#3
#3 |
.036-.210 .036-.210
.036-.210
.036-.210 |
3/4'' to 1'' 1-1/8'' to 1-1/2''
1-5/8'' to 2-3/8''
2-1/8'' to 3'' |
- Interior Rigid Insulation to Steel Frame
|
Performance Data
| PULLOUT
VALUES (average lbs. ultimate) |
| Fastener |
Steel Gauge
|
| Dia |
Pt. |
26 |
24 |
22 |
20 |
18 |
16 |
14 |
12 |
3/16 |
| 12 |
3 |
142 |
211 |
289 |
341 |
551 |
757 |
1063 |
1631 |
2998 |
| FASTENER
VALUES |
| Fastener (dia-tpi) |
Tensile (lbs.min) |
Shear (avg.lbs.ult.) |
Torque (min.in.lbs) |
| 12-14 |
2778 |
2000 |
90 |
| SHEET
STEEL GAUGES |
| Gauge No. |
12 |
14 |
16 |
18 |
20 |
22 |
24 |
26 |
| Decimal Equivalent |
.105'' |
.75'' |
.060'' |
.48'' |
.036'' |
.030'' |
.024'' |
.018'' |
| SHEAR
VALUES (average lbs. ultimate) |
| Fastener |
Steel Gauge
(average lbs. ultimate) |
| Dia |
Pt. |
26 |
24 |
22 |
20 |
18 |
16 |
14 |
12 |
| 12 |
3 |
|
|
|
769 |
1358 |
1620 |
1970 |
1986 |
The values listed are ultimate averages achieved under
laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety
factors should be applied to these values for design purposes.
Installation Guidelines
 |
A standard screwgun with a depth
sensitive nosepiece should be used to install teks. For optimal fastener performance, the
screwgun should be a minimum of 4 amps and have a RPM range of 0-2000. |
|
Adjust the screwgun nose piece
to properly seat the fastener. |
|
New magnetic sockets must be
correctly set before use. Remove clip build up as needed. |
|
Overdriving may result in
torsional failure of the fastener or stripout of the substrate. |
|
The fastener must penetrate
beyond the metal structure a minimum of 3 pitches of thread. |
 |
Teks®,
Maxiseal®, and Building Ideas that
Work™ are trademarks of ITW Buildex and Illinois Tool Works Inc. |
BUILDING IDEAS THAT WORK™1349 West
Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com |
©1999
Illinois Tool Works, Inc. |
|
