Buildex Products Catalog (ITW Buildex)

DrivTru™

HWH Socket System

Product Report No.81112

Selector Guide

Part No.	Description	Applications
1591910	DrivTru Socket	All 1/4'' across flats HWH fasteners
1513910	DrivTru Socket	All 5/16'' across flats HWH fasteners
1574910	DrivTru Socket	All 3/8'' across flats HWH fasteners

Performance Data

FASTENER DESCRIPTION AND BREAKDOWN
Example:
10 Nominal Screw Size	-	16 Threads Per Inch	X	3/4 Screw Length	HWH Head Style	TEKS/3 Drill Point Type

*Drill & tap capacities may vary with special feature designs. Refer to product report for specifics.

Installation Guidelines

	A standard screwgun with a depth sensitive nosepiece should be used to install teks. For optimal fastener performance, the screwgun should be a minimum of 4 amps and have a RPM range of 0-2000.
	Adjust the screwgun nose piece to properly seat the fastener.
	New magnetic sockets must be correctly set before use. Remove clip build up as needed.
	The fastener is fully seated when the head is flush with the work surface.
	Overdriving may result in torsional failure of the fastener or stripout of the substrate.
	The fastener must penetrate minimum of 3 pitches of thread beyond the metal structure.

DrivTru™, Teks^® and Building Ideas the Work™ are trademarks of ITW Buildex and Illinois Tool Works Inc.

BUILDING IDEAS THAT WORK™

1349 West Bryn Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com

DrivTru - Page 26