Dektite and Retrofit Dektite - Page 27

DEKTITE^® AND RETROFIT DEKTITE^®

Pipe Flashing

The Original Flexible Pipe Flashing System With A 20 Year Warranty.

Applications

Plumbing, Heating, Air  Conditioning, Electrical and Exhaust Vents.

Product Features

	Made of long life, flexible weatherproof gray EPDM rubber or red silicone.
	Flexible, corrosion resistant aluminum base conforms to any panel configuration.
	EPDM and silicone will not crack or break.
	Pipe diameter markings are clearly indicated for accurate fitting.
	Designed for 1/4'' to 24'' diameter pipes.
	One piece construction is easy to install.
	Plated cone adjusts to any roof pitch and allows for complete flexibility.
	EPDM has a continuous service temperature range of -30°F to + 250° F.
	silicone has a continuous service temperature range of -40°F to + 350° F.
	Proven resistance to ozone and ultra-violet light.

Product Specifications

Dektite Installation Guidelines

STEP1: Cut  Dektite® at appropriate pipe diameter marking.	STEP 2: Slide  Dektite® flashing down over pipe.	STEP 3 : Apply sealant on underside of flexible aluminum bases.	STEP 4: Press  Dektite® base into contours of panel configuration.	STEP 5: Fasten  Dektite® to surface with Buildex   SCOTS® self-drilling fasteners. Apply additional sealant around base if desired.

Notes:

• Dektite^® can be installed over or between the ribs of standard panels.
• DO NOT install over SSR or architectural panel ribs.
• Generally no sealant is required where the  Dektite^® collar provides a compression fit around the pipe. However, some metal pipes and flues include a seam which may require a local application of silicone sealant at the point where the  Dektite^® collar crosses the seam.