| Search |
|
|
|
| |
| Site Navigation |
|
|
|
| News / Publications |
|
|
|
| Jobs | |
|
|
| Service |
|
|
|
|
|


|
| |
|
| |
ITW Buildex Buildex Products Catalog Flashdek - Page 32
| FLASHDEK® |
FLEXIBLE FLASHING SYSTEM |
Product Report No.81115 |
Selector Guide
DEKTITE®
FLASHING GUIDE
| Description |
Base Kit
Part Number |
Complete
Kit Part Number |
| 7'' x 50' 7'' x 150' |
4070911 4071911 |
|
| 9'' x 50' 9'' x 150' |
4054911 4053911 |
4049911 4050911 |
| 12'' x 50' 12'' x 150' |
4060911 4059911 |
4056911 4057911 |
| 18'' x 50' 18'' x 150' |
4066911 4065911 |
4062911 4063911 |
Base Kit Contains:
- Material
- 2 termination strips per roll
- 1 roll Hypalon®
splice material
Complete Kit Contains:
- Material
- 250 1/4-14 X 1-1/8" Scots®
fasteners per 50' length
- 8 tubes sealant per 50' length
- 2 termination strips per roll
- 1 roll Hypalon splice material
Performance Data
| PROPERTY |
TEST METHOD |
RESULTS |
| Material |
----- |
Hypalon® |
| Color |
----- |
Polyester |
| Thickness (In) |
----- |
0.25 ± .0.02'' |
| Weight (oz./Sq.Yd.) |
----- |
22.5 ± 10% |
| Tensile Strength (Pounds per inch width)
Room Temp (75 ± 5°)
Warp
Fill |
Federal STD 191 Method 5100 |
250 lbs./in. minimum. 200 lbs./in. minimum. |
| Water Vapor Transmission Rating
(gms/m2/24hr) |
ASTM-E-96 |
43.44g/m2/24 hrs. |
| PROPERTY |
TEST METHOD |
RESULTS |
| U.L. Fire Resistance Rating |
U.L. -94 |
U.L. -94HB |
| Service Temperature Range |
----- |
-40° to 190°F Continuous |
| Tear Resistance (Pounds per inch of width)
Warp
Fill |
ASTM 2262 |
25 lbs min. 25 lbs min. |
| Heat Aging 7 days @ 190° F
Change Tensile Warp
Change Tensile Fill |
Federal STD 191 Method 5850
Method 5100
Method 5100 |
10% Max. Loss 10% Max. Loss |
FLASHDEK ... Simple and Easy to
Install
 |
 |
| STEP 1 :
Snap a chalk line providing a guide for applying sealant. |
STEP 2 :
Apply a continuous bead of sealant along chalk line |
 |
 |
| STEP 3 :
Position top edge of Flashdek over seal bead and install Buildex fasteners at 6'' maximum
in\intervals on top edge. Repeat steps 1, 2, and 3 for the bottom edge. Provide enough
slack in the Flashdek for expansion. |
STEP 4:
Apply additional sealant to both fastened edges for maximum waterproof sealing. |
Recommended Sealant: Chemseco Sikaflex sealant,
part number 4040910.
 |
Flashdek®,
Teks®, Scots© and Building Ideas the
Work are trademarks of ITW Buildex and Illinois Tool Works Inc. Hypalon® is a registered trademark of Dupont Co,
Sikaflex® is a registered trademark of
Chemseco Corp. |
BUILDING IDEAS THAT WORK 1349 West
Bryn Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com |
©1999
Illinois Tool Works, Inc. |
|
Copyright © 19962008 AECinfo.com
|
|