Tapcon - Page 33

TAPCON^®

The Original Masonry fastening System

The Original Masonry anchor that cuts threads into concrete, brick or hollow block.

Applications

	Electrical junction boxes and conduit clips to masonry.
	Wood headers and furring strips to masonry.
	HVAC strapping to masonry.
	Plywood backer boards to masonry.
	Exterior insulation systems to masonry.

Product Features

	Fast installation...drill a hole ... drive an anchor.
	Packaged with one Tapcon ''close tolerance" masonry drill bit per 100 anchors
	Available in 3/16'' and 1/4'' diameters and in lengths 1-1/4'' -6''.
	Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications.
	No need to pre-spot holes ... and no inserts are required.
	Reversible and removable ... can be installed close to an edge.

Installation Tools

	Condrive® 500
	Condrive® 1000 - A multi-purpose tool designed for installation of Tapcon hex head and Phillips flat head anchors up to 4'' long.
	Condrive®  2000 - A highly-automated high speed, one step tool designed specifically for repetitive installation of hex head Topcon anchors of lengths up thru 2-3/4''.
	Both Buildex Condrive Tools are designed to specifically install Tapcon Anchors and to fit standard hammer drills or SDS Rotary Hammer drills.

Approvals and Listings

Metro-Dade Approved #96-1226-03 ICBO Approved #3370, SBCCI Approved #9759 Palm Beach County, Florida, City of Chicago, City of Los Angeles, City of New York

Product Specifications

Diameter .......... 3/16'' and 1/4''

Thread Form... Original notched Hi-Lo^®

Point Type....... Nail

Finish................ Blue Climaseal^®

Corrosion Resistance

Kesternich Results (DIN 50018,2.0L)

• 30 Cycles - 10% or less red rust

Salt Spray Results (ASTM B117)

• 720 Hours - 10% or less red rust

Head Styles

3/16'' Diameter: 1/4'' slotted hex washer head (HWH)

1/4'' Diameter: 5/16'' slotted hex washer head (HWH)

3/16'' Diameter : #2 Phillips flat head (PFH)

1/4'' Diameter : #3 Phillips flat head (PFH)