| E-Z Products |
SELF-DRILLING, ONE -PIECE ANCHOR
FOR LIGHT DUTY DYWALL ATTACHMENTS |
Product Report No.81119 |
Selector Guide
| |
Anchor
Description |
Anchor
Material |
Part Number |
Quantity |
Maximum
Fixture Thickness |
| Light
Duty |
E-Z Anchor
Lite™ |
 |
White Nylon |
5006902 |
100 count |
3/4'' |
| E-Z
Mini Ancor™ |
 |
Zinc |
5033902 |
100 count |
3/4'' |
| 5034902 |
100count-ValuePak 50#6x1-1/4''SMS
50#8x1-1/4''SMS |
| Medium
Duty |
E-Z
Ancor® |
 |
Zinc |
5000902 |
100 count |
3/4'' |
| White Nylon |
5003902 |
100 count |
| Heavy
Duty |
E-Z
Toggle™ |
 |
Zinc |
5014901 |
50 count 50 # 8x2-1/8'' Pan SMS |
5/8'' |
| 5017901 |
50 count 50 # 8x2-1/8'' Large Washer Face SMS |
Sheet Metal Screws Available: #6 x 1-1/4'' (1,000) count
box -5021206 # 8 x 1-1/4'' (1,000) count box -5022206.
Performance Data
| |
Pullout
(ultimate average lbs.) |
Shear
(ultimate average lbs.) |
| |
Gypsum
Thickness |
Gypsum
Thickness |
| |
3/8'' |
1/2'' |
5/8'' |
3/8'' |
1/2'' |
5/8'' |
| E-Z Anchor
Lite |
25 |
30 |
40 |
80 |
90 |
120 |
| E-Z Mini Anchor |
30 |
40 |
50 |
91 |
110 |
140 |
| E-Z Anchor |
40 |
50 |
75 |
135 |
150 |
200 |
| E-Z Toggle |
70 |
85 |
150 |
200 |
230 |
300 |
These performance values are averages obtained under
laboratory conditions. Note that these values will change depending on age, moisture
content and surface treatment of the drywall (gypsum) material. Appropriate safety factors
should be applied to these values for design purposes.
Installation Guidelines
Light Duty E-Z Anchor Lite,
E-Z Mini Anchor & Medium Duty E-Z Anchor
 |
1. Place # 2 Phillips screwdriver into recess of E-Z
Anchor Lite, E-Z Mini Anchor or E-Z Anchor. 2. Press
into drywall while turning the anchor clockwise until it is seated flush with wall
3. Place fixture in position over installed E-Z
Anchor Lite, E-Z Mini Anchor or E-Z Anchor. Insert screw with screw driver, Tighten
fixture in place. |
Heavy Duty E-Z Toggle
 |
1. Place # 2 Phillips screwdriver into recess of E-Z
Toggle. Press into drywall while turning the anchor clockwise until it is seated flush
with wall and arrows on head are parallel to stud 2.
Place fixture in position over installed E-Z Toggle. Insert Screw and push through
E-Z Toggle to engage clamp.
3. Continue turning screw until tight. The clamp will move
back against the drywall as the screw turned. |
 |
E-Z Mini Anchor U.S. Patent Number-5,558,479,
9/24/26, E-Z Ancor®, E-Z Anchor Lite™
, E-Z Mini Anchor™ , E-Z Toggle™ , and
Building Ideas that Work™ are trade marks of ITW Buildex and Illinois Tool
Works Inc. |
BUILDING IDEAS THAT WORK™ 1349 West
Bryn Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com |
©1999
Illinois Tool Works, Inc. |
|
