| GRID-MATE™ | SELECTOR GUIDE | Product Report No.81123 |
Washers
| Part Number | Description | Carton Quantity | Carton Weight |
| 2115900 | Grid-Mate Washer | 1000 | 4.5 lbs. |
| 2117900 | Grid-Mate with Stem | 1000 | 5.0 lbs. |
Fasteners
| WOOD/LIGHT METAL For use with plywood, OSB, dimensional lumber and light gauge metal 26 gauge -20 gauge.)
|
STEEL FRAMING For use with steel framing from 20 gauges -12 gauge
|
MASONRY For use with brick, block and concrete
|
|||||||||||
| Part Number | Des- cription |
Carton Qty. | Carton Wgt. | Part Number | Desc- ription |
Carton Qty. | Carton Wgt. |
Part Number | Desc- ription |
Carton Qty. | Carton Wgt. | ||
| 2311500 | 6x1-5/8'' | 5000 | 23 | 2321500 | 6x1-5/8'' | 5000 | 25 | 3171407 | 3/16 x 1-3/4'' | 100/ 1000 | 10 | ||
| 2312500 | 8x2'' | 3500 | 28 | 2318500 | 8x2'' | 3500 | 28 | 3173407 | 3/16 x 2-1/4'' | 100/ 1000 | 12 | ||
| 2313500 | 8x2-1/2 | 2000 | 21 | 2319500 | 8x2-1/2 | 2500 | 26 | 3175407 | 3/16 x 2-3/4'' | 100/ 1000 | 15 | ||
| 2314500 | 8x3'' | 1000 | 20 | 2320500 | 8x3'' | 2000 | 24 | 3177407 | 3/16 x 3-1/4'' | 100/ 1000 | 17 | ||
| 2315500 | 10x4'' | 1000 | 12 | 2322500 | 10x4'' | 1000 | 21 | 3181407 | 3/16 x 4'' | 100/ 1000 | 21 | ||
| 2316500 | 10x5'' | 1000 | 23 | 2323500 | 10x5'' | 1000 | 26 |
|
|||||
| 2317500 | 10x6'' | 1000 | 27 | ||||||||||
Assembled Washers and Fasteners |
|||||||||||||
| Part Number | Insul- ation Thick- ness | Screw Length | Carton Qty. | Carton | Part Number | Insul- ation Thick- ness | Screw Length | Carton Qty. | Carton | ||||
| 2352500 | 1'' | 1-5/8'' | 1000 | 9 | 2355500 | 1'' | 1-5/8'' | 1000 | 10 | ||||
| 2353500 | 1-1/2'' | 2'' | 1000 | 12 | 2356500 | 1-1/2'' | 2'' | 1000 | 13 | ||||
| 2354500 | 2'' | 2-1/2'' | 1000 | 13 | 2357500 | 2'' | 2-1/2'' | 1000 | 14 | ||||
|
|
||||||||||||
Performance Data
Steel Application
| Sheet Steel Gauges | ||||||||
| Fastener | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 12 |
| Wood/Light Metal(Hi-Lo®) | 129 | 178 | 244 | 277 | ||||
| Steel S-12™ | 296 | 471 | 679 | 847 | 1225 | |||
The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factor's should be applied to these values for design purposes. Wind-load test results also available upon request.
Concrete/Masonry Application
| Tapcon Diameter | 3000 psi Concrete Embedment | Hollow Block Embedment | ||||||
| 1'' | 1-1/4'' | 1-1/2'' | 1-3/4'' | 1'' | 1-1/4'' | 1-1/2'' | 1-3/4'' | |
| 3/16'' | 341 | 581 | 863 | 1059 | 209 | 357 | 468 | 547 |
| 1/4'' | 718 | 1138 | 1537 | 1860 | 406 | 615 | 851 | 984 |
Wood Applications
| Fastener | Plywood | OSB | Lumber (Embedment) | |||||
| Wood/Light Metal(Hi-Lo®) | 1-1/2'' | 5/8'' | 3/4'' | 1/2'' | 1/2'' | 3/4'' | 1'' | 1-1/4'' |
| 298 | 432 | 633 | 208 | 183 | 304 | 441 | 652 | |
Tools and Techniques
 |
Use a 0-2500 RPM, 5 amp min. rated screwgun or cordless drill into install fasteners to wood and steel substrates. Use a hammer drill or rotary hammer to install Tapcon masonry anchors. |
|
Seat Grid Mate PB washers flush with or maximum 1/16'' below insulation surface. Overdriving Grid-Mates may damage the washer and insulation. |
|
Fasteners must penetrate steel substrates a minimum of 3 pitches of threads. |
|
Replace worn or damaged bit tips to prevent damage to fastener head and its finish. |
|
Consult EIFS system manufacturers specifications for appropriate fastener spacing. |
 |
Grid-Mate™, Climaseal®, Climacoat® , Hi-Lo®, S-12™, Tapcon® and Building Ideas the Work™ are trademarks of ITW Buildex and Illinois Tool Works Inc. |
 BUILDING IDEAS THAT WORK™ 1349 West Bryn Mawr Avenue |
|
©1999 Illinois Tool Works, Inc. |
