architecture - engineering - construction
ITW Buildex
Flashings
Dektite and Retrofit Dektite
Flashings
| DEKTITE® |
PIPE FLASHING |
Product Report No.81113 |
Selector Guide
DEKTITE®
FLASHING GUIDE
| Part No. |
Description |
Pipe Outside Diameter |
Dektite Base Diameter |
Detite Height |
| 4001910 |
Mini |
1/4''-1-1/8'' |
3-1/2'' |
1-3/4'' |
| 4003910 |
1 |
1/4''-2'' |
4-3/4'' |
3'' |
| 4004910 |
2 |
1-3/4''-3-/14'' |
6-1/4'' |
4'' |
| 4009910 4035910 |
3 #3 silicone |
1/4''-4'' |
7-3/4'' |
4'' |
| 4011910 |
4 |
3''-6'' |
9-1/4'' |
5'' |
| 4016910 4036910 |
5 #5 silicone |
4''-7'' |
10-3/4'' |
5'' |
| 4018910 |
6 |
5''-9'' |
12-1/2'' |
6'' |
| 4020910 |
7 |
6''-1'' |
14-1/2'' |
6'' |
| 4025910 4038910 |
8 #8 silicone |
7''-13'' |
16-1/2'' |
6'' |
| 4028910 4039910 |
9 #9 silicone |
10''-18'' |
25-3/8'' |
8'' |
| 4000910 |
Diverter |
16''-24'' |
39-1/2'' x 35'' |
9'' |
Note: When used on roofs where pitch is
steeper than 20 degrees, or when used on deep ribbed profile roof panel (1-1/2'' deep
corrugation or more), consider using next larger size Dektite that will accommodate the
same pipe diameter. Recommended Sealant: Chemseco Sikaflex ® sealant, part number 4040910
Retrofit Dektite®
Selector Guide
| Part
Number |
Dektite
Size Number |
Pipe
Outside Diameter |
Dektite
Base Diameter |
Dektite
Height |
| 4029210 |
801 |
3/4'' - 2-3/4'' |
6-3/10'' |
3-1/2'' |
| 4030910 |
802 |
2'' - 7-1/4'' |
10-3/4'' |
5-3/5'' |
| 4031910 |
803 |
3-1/4'' - 10'' |
14-1/2'' |
5-4/5'' |
Performance Data
| ASTM Method |
Test Description |
Specification |
Test Results |
| D412 |
Tensile Strength (min.psi rating) |
1450 psi. min |
1537 psi |
| D412 |
Ultimate Elongation(%) |
350 min. |
535 |
| D1171 |
Resistance to Ozone Min. rating |
100 (no cracks) |
Passed |
| D673 |
Heat Aging - 70 hrs. at 212° F |
- Change in Hardness (points)
|
± 15 max. |
+8 |
- Change in Tensile Strength (%)
|
± 30 max. |
-4.7 |
|
|
± 50 max. |
-26 |
| ASTM Method |
Test Description |
Specification |
Test Results |
| D2137 |
Low Temperature Brightness 3 mins. at -40°F |
Non-brittle |
Passed |
| D624 |
Tear Resistance Die C(min) per inch of width
min. |
125 pounds per inch of width |
130 pounds |
| U.L. 94 |
Flame Resistance |
U.L.94 H.B. |
Passed |
 |
 |
 |
| STEP 1 :
Begin cutting opposite of the mechanical locking joiner. Cut through the joiner with tin
snips. |
STEP 2 :
Wrap Retrofit Dektite® around the pipe.
Engage the top section of the joiner first, then proceed down until joiner is completely
engaged. |
STEP 3 :
Crimp joiner tightly, starting at the top by squeezing joiner ''finger's' with pliers. |
 |
 |
 |
| STEP 4 :
Apply sealant to the underside of the ribbed aluminum base. Press Retrofit Dektite® against contours of the panel configuration. |
STEP 5 :
Apply Retrofit Dektite® to the panel with
SCOTS® self-drilling screws. Screws should
be spaced as necessary to avoid gaps between the base and the panel. |
STEP 6 :
Apply additional sealant around the top of the Dektite®
and along the mechanical locking joiner seam. |
Recommended Sealant: Chemseco Sikaflex sealant,
part number 4040910.
 |
Dektite®
Retrofit Dektite®, SCOTS® and Building Ideas the Work™ are trademarks of
ITW Buildex and Illinois Tool Works Inc. Sikaflex®
is registered trademark of Chemseco Corporation. |
BUILDING IDEAS THAT WORK™ 1349 West
Bryn Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com |
©1999
Illinois Tool Works, Inc. |
|
