Flashings (ITW Buildex)

DEK-CAP™

STANDING SEAM ROOF END CAP FLASHING

Product Report No.81114

Selector Guide

DEKTITE^® FLASHING GUIDE

Part No.	Description	Application
4146910	Dec-Cap	Metal Curbs, Skylights, Ridge Applications, Jobsite Retrofit

Performance Data

ASTM Method	Test Description	Specification	Test Results
D412	Tensile Strength (min.psi rating)	1450 psi. min	1500 psi
D412	Ultimate Elongation(%)	350 min.	450
D1171	Resistance to Ozone Min. rating	100 (no cracks)	Passed
D573	Heat Aging - 70 hrs. at 212° F
	Change in Hardness (points)	± 15 max.	+3
	Change in Tensile Strength (%)	± 30 max.	+2
	Change in Elongation (%)	± 50 max.	-3

ASTM Method	Test Description	Specification	Test Results
D2137	Low Temperature Brightness 3 mins. at -40°F	Non-brittle	Passed
D624	Tear Resistance Die C(min).	125 pounds per inch of width	Passed

Installation Guidelines


STEP 1 : Bend top so that both sides are parallel to metal roof	STEP 2 : Press Dek-Cap edges into contours of panel configuration.	STEP 3 : Remove and apply sealant on underside of flexible aluminum

STEP 4: Slide Dek-Cap flashing over panel profile	STEP 5 : Follow indicated fastening pattern to attach Dek-Cap to surface with Buildex Scots self-drilling fasteners.	STEP 6 : Apply additional sealant around base if desired.

Recommended Sealant: Chemseco Sikaflex sealant, part number 4040910.

Dek-Cap™ Scots^® and Building Ideas the Work™ are trademarks of ITW Buildex and Illinois Tool Works Inc.

BUILDING IDEAS THAT WORK™

1349 West Bryn Mawr Avenue
Itasca, Illinois 60143
630/595-3500 FAX: 630/595-3549
www.itwbuildex.com