architecture - engineering - construction
ITW Buildex
Roofing
#15 Roofgrip page 1
Roofing
 Roof Fastening Systems
#15 ROOFGRIP™
(Drill Point)
Extra Heavy Duty, All-Purpose #3 Phillips drive fastener. Used for attachment applications to
light gauge steel (18- 26), wood or concrete.
 
Product Features
 |
High performance versatile
fastener. One fastener for all insulation and single-ply attachment applications. |
|
Membrane termination bar
attachment to concrete and hollow block. |
|
Deep #3 Phillips recess for
positive bit engagement. |
|
Extra pull-out performance for
increased safety factor on marginal decks. |
|
Mini Drill point provides
unsurpassed drilling consistency in 18-26 gauge metal and wood decks. |
Product Specifications
| Diameter |
#15 |
| Thread Form |
Modified Standard Thread |
| Head Style |
#3 Phillips |
| Drilling Capacity |
18-26 Gauge Metal Deck |
| Coating |
Spex™ / Climaseal® |
| Installation |
ITW Buildex Accudrive XL
PLUS™ or a Standard 1,800-2,500 RPM Screwgun |
Corrosion Resistance
Offered with ITW Buildex Spex or Climaseal long-life
corrosion resistant coatings, #15 Roofgrip exceeds the corrosion resistance requirements
set forth in Factory Mutual Specification #4470. For additional information on ITW Buildex
coatings, please refer to Product Report #389140.
Plates
#15 Roofgrip fasteners are designed to perform with the
following ITW Buildex Plates..
| Plate |
Material
|
Dimensions |
Features |
Recessed Metal |
Galvalume |
3" x 3"
Square |
Also accommodates
Hex Head |
Flat Bottom Metal |
Galvalume |
3" x 3"
Square |
For use with hard
board insulation |
GearLok Plastic |
High Density
Polyolefin |
3" Round |
Patented locking
feature positively locks fastener head into plate eliminating fastener back-out and
pop-up. |
2" Metal Seam |
Galvalume |
2" Round |
Single-Ply Membrane
Attachment, Heavy 20 Gauge Material. |
2" Pentalok |
Galvalume with
Polyolefin locking insert |
2" Round |
Patented locking
insert positively locks fastener head into Plate eliminating fastener back-out and pop-up. |
2" PRP |
Galvalume with
locking insert and protective ring |
2" Round |
Most advanced
membrane plate in the industry. Patented locking insert eliminates fastener back-out and
pop-up. Protective outer ring minimizes plate slippage and membrane tear. |
|
