architecture - engineering - construction
ITW Buildex
Roofing
Bugle RoofGrip page 2
Roofing
| BUGLE
ROOFGRIP™ STEEL AND WOOD DECK FASTENING PRODUCT REPORT NO. 70801
Installation Guidelines
 |
Use an ITW Buildex Accudrive XL
PLUS or a standard screwgun with a disengaging clutch should be used to install Bugle
Roofgrip. The screwgun should have a range of 1,800-2,500 RPM. The screwgun should also
have a minimum current rating of 4 amps. |
|
The nosepiece of the screwgun
should be adjusted so the clutch disengages when the fastener is fully and properly
seated. |
|
Fasteners should be spaced using
a pattern specified by the insulation or roof cover manufacturer. |
|
The fastener must penetrate the
metal deck a minimum of 1/2". |
|
Overdriven fasteners will
significantly reduce fastener and plate performance and/or strip the deck. Underdriven
fasteners will not distribute the load over the plate properly. |
| Selector Guide |
| Part No.(Spex) |
Fastener Length |
Drive Needed |
Usable Thread
Length |
Box Qty. |
| 6504106 |
1-1/8" |
#2 PH |
7/8" |
1000 |
| 6505106 |
1-5/8" |
#2 PH |
1-3/8" |
1000 |
| 6506106 |
2-1/8" |
#2 PH |
1-7/8" |
1000 |
| 6507106 |
2-3/4" |
#2 PH |
2" |
1000 |
| 6508106 |
3-1/4" |
#2 PH |
2-1/2" |
1000 |
| 6509106 |
3-3/4" |
#2 PH |
2-3/4" |
1000 |
| 6510106 |
4-1/4" |
#2 PH |
3-1/8" |
1000 |
| 6511106 |
4-7/8" |
#2 PH |
3-3/4" |
1000 |
| 6512106 |
5-3/8" |
#2 PH |
3-3/4" |
1000 |
| 6513106 |
6-1/4" |
#2 PH |
3-3/4" |
1000 |
| 6514106 |
7" |
#2 PH |
3-3/4" |
1000 |
| 6316910 |
#2 Phillips Bit |
1/ea. |
| 6281910 |
Accudrive XL PLUS
Installation Tool |
1/ea. |
Ultimate
Tensile Load - 2562 lbs.
Ultimate Shear Load - 1229
lbs. |
Pullout Values |
| In Metal |
| Gauge |
18 |
20 |
22 |
24 |
26 |
| Lbs. |
894 |
656 |
488 |
425 |
294 |
| In Plywood |
| Thickness |
3/8" |
|
1/2" |
|
3/4" |
| Lbs. |
200 |
|
326 |
|
544 |
| In Wood Plank |
| Depth |
1" |
|
1-1/4" |
|
1-1/2" |
| Lbs. |
784 |
|
1084 |
|
1292 |
| NOTE: Test results were obtained under
laboratory controlled conditions. Appropriate safety factors should be applied to these
ultimate values. |
For engineering assistance or the name of your nearest ITW
Buildex distributor call toll-free 1-800-BUILDEX
BUILDING IDEAS THAT WORK™
1349 West Bryn Mawr Avenue
Itasca, IIIinois 60143
630/595-3500 FAX: 630/595-3569
Accudrive XL PLUS, SPEX and Building Ideas That Work are
trademarks of ITW Buildex and IIIinois Tool Works Inc.
©1997 IIIinois Tool Works, Inc. |
