Roof Fastening Systems

The Roofing Industry's Premier Automated System for Insulation Attachment to Steel And Wood Roof Decks.

Superior Productivity

	Positions plate and installs fastener in a one-step, continuous process... provides significant labor and installed cost savings.
	Accomplishes with one person what normally requires two... allowing for more efficient and productive deployment of manpower.
	Stand-up operation reduces operator fatigue and increases productivity.
	Boosts total job productivity by up to 33%. increases insulation attachment productivity by up to 50%.
	Compatible with 3" square AccuTrac insulation plates.

Easy to Operate

One piece Hex drive shaft makes bit changing a snap

	Typical roofing crew can learn to use the tool and become more productive in less than one day.
	Mechanically simple design provides easy operation and limited downtime.
	Weights 35lbs. when fully loaded...easily accommodates both straight line and "zig zag" fastening patterns.
	Depth setting feature eliminates overdriving and underdriving of fasteners.
	Maintains consistent vertical alignment of fasteners during installation, ensuring maximum thread engagement and pullout performance.

The Industry's Choice

	The AccuTrac III costs significantly less than other automated tools designed for the same application.
	The AccuTrac III tool does not require the use of expensive collated fasteners.
	Accommodates AccuTrac fasteners up to 6" long.
	Carrying case protects AccuTrac tool when not in use.
	Contact your Buildex Sales Representative toll-free at 800-BUILDEX (800-284-8339) for more information.

AccuTrac Fasteners

	Drill Point - Patented X-Point is proven industry leader in drilling efficiency and consistency in decks up to 16 gauge.
	Hex Head - Results in socket life of up to ten times that of conventional Phillips bits.
	Note: Roofgrip fasteners (phillips pan head) also available upon request.

AccuTrac Plates

	Type - Galvalume 3" x 3" square.
	Patented Rib Configuration - Ensures proper spacing   between plates. Prevents feeding more than one plate at a time.
	Patented Locating Notch - Ensures plates and magazines are properly loaded into tool and plates are fed from correct edge.