8100 Door Pulls

• Conforms to A.N.S.I. A156.6
• Special mounting methods available

8200 Push Plates

• Optional CFC (cut for cylinder) 1-1/4" dia. or CFT (cut for thumbturn) 3/8"dia.
• Brass, bronze, stainless steel and aluminum push plates conform to A.N.S.I. A156.6 for .05" thickness.
• Sizes: 3" x 12", 3.5" x 15", 4" x 16", 6" x 16", 8" x 16"
• Available in B3-4-10-10B-26-26D, S32D, Pa28 finishes.
  The 3.5" x 15" is carded in B3-5, S32D, PA28 finishes.
  The 3" x 12" is carded in B3 and PA28 finish.

8300 Pull Plates

• Pull and pull plates have uniform finish lines.
• Special mounting methods available
• Optional CFC - 1-1/4" dia. or CFT 3/8" dia.
• Conforms to A.N.S.I. A156.6
• Sizes: 3.5" x 15", 4" x 16", 6" x 16"
• All are available in B3-4-10-10B-26-26D, S32D, PA28 finishes.
  Other finishes available on request. Call for details.

*Available only for 8102, 8103, 8111 and 8114 Pulls
**Available only for 8102 and 8103 Pulls

8400 Protection Plates

• 1/8" thick clear acrylic plastic, or black or brown high-impact polyethylene
• Plastic plates are beveled on four side.
• Brass, bronze, stainless steel and aluminum protection plates conform to A.N.S.I.A.156.6 for .050" thickness.
• Sizes: mop: 4"-6:H x 22"-48"W, kick/stretcher: 8"-24"H x 22"-48"W, armor: 26"-48"H x 22"-48"W
• Available in B3-4-5-10-10B, S32, S32D, PA28 and clear/black/ brown plastic.
• 8400 8" x 34", 6" magnetic backed are available in B3 and Pa3 finishes for use on steel doors.
• 8400 6" x 30", 6" x 34" and 8" x 34" are available in PA3 finish.
• 8400 6" x 30", 6" x 34" and 8" x 34" are  carded in B3-5 and PA28 finishes.
• 8400 6" x 30", 6" x 34", 8" x 30"  and 8" x 34" are carded in Pa3 and S32D finishes.