architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Ives: H. B. Ives   Ives Products  

Ives Products - Page 14

   

Ives Products

Heavy Duty Surface Bolts

454, 360 U.S. Pat No. 4,021,063. Pat in Canada 1979. 0454 U.S. Pat No. 4, 060,266.361 U.S. Pat, No.4,198,082. Pat. No. in Canada 1982.

  • 361 features tamper-resistant mounting. Universal top strike permits use of bolts with inswinging and outswinging  doors
  • 360 for flush labeled metal fire doors
  • 360 and 0454 are tamper resistant and accept padlock (not included) with max. 3/8" dia. shackle; min. 1-3/4" shackle opening height
  • Rod of 453, 454 and 0454 is 1/4" x 3/4"
  • 454 available in 28" and 44" lengths for hurricane force winds
  • Rod of  360 is 3/4" x 3/4"
  • Width of 360, 453, 454 and 0454 is 2-1/32"
  • Width of 361 is 1"
  • 453, 454 and 0454 are available with mortise, rim and universal strikes
  • 454 features jimmy resistant design
  • 361 and 360 are available with mortise and universal strikes
  • Lengths over 12" are not UL Listed
Prod. No. Length Proj. Throw Finishes
360 12", 24" 2-1/16" 1-1/4" F2C
361 8" 1-5/8" 1" F2C-3-10-10B-26D
453 8", 12", 18", 24" 1-5/16" 1-3/16" F2C-10-26D
454 5"
8"
12"
1-5/16"
1-5/16"
1-5/16"
1-3/16"
1-3/16"
1-3/16"
F2C-4-10-26D
F2C*-10-10B-26D
F2C-10-26D
0454 5", 8" 1-5/16" 1-3/16" F2C-26D

Extension Flush Bolts

For use on installations not requiring UL label

  • Extruded brass or aluminum plate, aluminum slide and bolt head
  • Standard length of rod is 12". 6" length available on special order.
  • 458-1/2" fits standard A.N.S.I. A 115.4 door and frame prep.
  • Strike included
Prod.No. Rod Backset Bolt Head Throw Finishes
256 5/8" 1/2" sq. 3/4" B3-4-10-10B-26-26D
257,258, C258 5/8" 1/2" sq. 3/4" B3-4-10-10B-26-26D
457-1/2 3/4" 1/2" sq. 3/4" B3-4-10-10B-26-26D
458-1/2 3/4" 1/2" rd. 3/4" B3-9-10-10B-19-26-26D
0458-1/2 3/4" 1/2" rd. 3/4" B3-26D

C = Convex Face

UL Listed Seff-Latching Flush Bolts

For use as top and bottom flush bolts on the inactive leaf of pair of coordinated doors where the inactive leaf is not required for exit purposes.

  • Architecturally finished bras cover plate permits finish changes in stock or at job site.
  • Epoxy coated single lip wear plates wrap around 1-1/4" active leaf, supplied with shims to compensate for door gap in excess of specified bolt installation dimensions.
  • 356 is for labeled wood covered composite fire doors, not exceeding 1-1/2 hr. fire rating and 8 ft. in height.
  • 357 is for labeled hollow metal fire doors, not exceeding 9 ft. in height, and for steel-covered composite fire doors not exceeding 8 ft. in height, both having a maximum rating of 3 hours.
  • 357 fits A.N.S.I. A115.4 door prep for manual bolts and is spring actuated, manually retracted.
  • Tested under UL supervision for a minimum of 100,000 cycles
  • Bolts remain deadlocked when active leaf is closed providing security and fire protection.
  • Adjustable projection of bolt head for undercut doors
  • Designed and UL Listed for 1-3/4" thick labeled doors
  • Doors must be equipped with a coordinator.
  • Non-handed
  • Strike included
  • Both are available in B3-9-10-10B-26-26D finishes.
  • Top Strike - A.N.S.I.A115.4 modified for strike lip
Prod.No. Backset Bolt Heads Throw Door Thickness Flat Floor Strike
356 3/4" 1/2" x 9/16" 3/4" 1-3/4" 2-1/4" x
357 3/4" rect. x 5/8" dia.
across corners
3/4" 1-3/4" 15/16"

*available carded



Request for Information / Request a Catalog from Ives: H. B. Ives
 
 
 
To request more information from Ives: H. B. Ives, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.