CSI/Jewett
Blood Refrigerators, Plasma Freezers, Red Cell Freezers
Cylindrical Blood Bank Refrigerator.
Blood Refrigerators, Plasma Freezers, Red Cell Freezers
CYLINDRICAL BLOOD BANK REFRIGERATOR
A Jewett trademark, the BB2 cylindrical blood bank refrigerator is designed for quick access to inventory and accurate cataloging of contents. Circular revolving shelves put blood components within easy reach, while the cylindrical configuration conserves valuable lab space. A forced-air circulation system maintains close temperature uniformity throughout the cabinet, while the microprocessor DTPM 1000 alarm/monitor system supervises operating conditions.
The BB2 is designed to meet AABB, ANRC, and FDA criteria for blood component storage.
General Features
- Solid-state electronic temperature controller, pre-set for +4°C operation.
- Microprocessor DTPM alarm/monitor system with digital temperature display, resolution to 0.1°C.
- Circular chart recorder for permanent record of solution temperature (optional).
- Adjustable, revolving shelves with one fixed shelf.
- Forced-air circulating system for maximum temperature uniformity.
DTPM Alarm/Monitor System
- Audible and visual warning in case of AC power failure or cabinet temperature deviation from setpoint.
- Auto-tracking overtemp parameters are factory set in accordance with AABB specifications.
- Different audio and warning light signatures to indicate specific failure modes.
- Built-in alarm silence with automatic ringback; choice of two pre-programmed time delays.
- Batter back-up with battery test switch.
Jewett Model BB2
Technical Specifications
Cylindrical Blood Bank Refrigerator
Model |
Cu Ft./Liters |
Unit Capacity1 |
Exterior WxDxH Inches/cm |
115V, 60Hz |
Amerage/Breaker* 208/230V, 60Hz |
200/230V, 50Hz |
Shelves/Fixed |
BB2 |
15.1 |
225 |
33" x 29" x
76" |
9.82/15.0 |
4.91/15.0 |
4.91/15.0 |
4/1 |
1 450 ml bags.
* Specify voltage when ordering. Recommended connection to dedicated electrical service
on separate breaker. 10' line cord provided.
See chart for shipping weights.
Cabinet Construction and Refrigeration
- Minimum 3" CFC-free cabinet insulation.
- Triple-pane heated glass door and frame with multi-point extruded vinyl gasket to prevent condensation.
- Adjustable, positive latch with cylinder key lock hardware for security.
- Fluorescent interior light, full-height for maximum visibility.
- Gavanealed steel interior and exterior with textured beige enamel exterior finish and white enamel interior finish; optional and stainless steel available.
- Quiet-running hermetically-sealed refrigeration compressor, air-cooled, with internal blower coil.
- Automatic defrost.
- Condensate evaporator.
Options (See Accessories)
- Temperature recorder, remote temperature monitor, blood bag adapter, shelf dividers.




