architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  CSI/Jewett   Blood Refrigerators, Plasma Freezers, Red Cell Freezers  

-85C Red Cell Freezers

   

Blood Refrigerators, Plasma Freezers, Red Cell Freezers

-85°C RED CELL FREEZERS

Jewett -85°C Super Cold red cell freezers include electronic temperature control, alarm, test and monitor functions. A built-in temperature recorder maintains a permanent record of storage temperature. This model can be used for plasma storage as well. Optional red cell canisters and plasma racks are available; see Accessories.


Red Cell Freezer Model LTUR13 (left), shown with Jewett
Super Cold™ ultra-low temperature chest and upright
freezer. All feature -85°C operating temperatures. 

Technical Specifications
Super Cold -85°C Red Cell Freezers

Model

Cu Ft/ Liters

Red Cell Cap.3

115V, 60Hz

Amp./Breaker*
208/230V, 60Hz 

200/230V, 50Hz

Interior WxDxH
Inches/cm 

Exterior WxDxH
Inches/cm 

LTUR13

13.4

200

15.2/20.0

11.0/15.0

11.0/15.0

50.5" x 19.5" x 23.5"
128.3 x 48.3 x 59.7 

79.5" x 28.75" x 33.5"
202 x 73 x 85 

3 Standard red cell canisters. Also holds up to 240 plasma units in boxes.
*Specify voltage when ordering. Other 50Hz voltages available include 200V or 230V, AC, 50Hz.

 

Electronic Controller, Alarm/Monitor system

  • Solid-state electronic controls with key-operated main power switch.
  • Extra-large digital temperature display, resolution to 0.1°C.
  • Solid-state, multiple function alarm system with self-charging battery back-up.
  • Audible and visual warning of temperature deviation or power failure.
  • Alarm silence button with automatic ringback function until fault is corrected.
  • Independent high and low temperature alarm setpoints, adjustable in 1°C increments.
  • Touchpad alarm test function physically heats probe to verify alarm readiness.
  • Low battery indicator.
  • Built-in voltage boost system adjusts instantly to low line current.
  • Clean filter indicator light warns of dirty air filter.
  • Exterior alarm contacts for connection to remote monitoring system.
  • Tamper-resistant, key-operated alarm switch.

Cabinet Construction and Refrigeration

  • Heavy-gauge steel cabinets with high-impact, easy to clean epoxy finish.
  • CFC-free insulation, minimum 5" urethane foam to protect against high ambient temperatures.
  • High strength outer door with 4" foam insulation; dual cam action hardware, lockable, with heavy-duty ball bearing hinges.
  • Independent double-seal door gaskets to minimize frost build-up; individual inner doors minimize cold air loss during openings.
  • Extra sound insulation to improve operating environment.
  • Recessed, heavy-duty casters, built-in 1" diameter access port, standard.
  • Industrial quality, hermetically-sealed compressors.
  • Exclusive down-feed evaporator and automatic scrubbing cycle for maximum refrigerant flow.
  • Washable condenser intake filter for unrestricted air-flow.



Solid-state controls and alarm monitor system are contained in an integrated control panel.
Touchpad controls are tamper-resistant with single multi-point key switch
for added security. 

A

Multi-position key switch for main power and alarm.

B

Indicator lights warn of temperature deviation or power failure.

C

Bright, easy-to-read digital display.

D

Indicator light advises when to remove and clean washable air intake filter.

E

Indicator light advises when to replace self-charging alarm system battery.

F

Alarm test button initiates test function to physically heat probe; no door opening is required.

G

Alarm silence button quiets audible alarm; alarm ringback continues until temperature returns to normal.

H

Touch pad setpoint controls for operating temperature, high alarm and low alarm limits.

I

Indicator light warns of low voltage, and indicates built-in voltage boost system is activated.

 



Request for Information / Request a Catalog from CSI/Jewett
 
 
 
To request more information from CSI/Jewett, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.