Roofing Accessories

Presto Lock^®
Coping Systems

Presto Lock Coping System

Presto Lock Coping System is a cost-effective snap-on coping system designed for use with single ply, built-up and modified bitumen roofing systems. The system consists of stainless steel anchor clips, and aluminum or galvanized coping cover in a variety of thicknesses and colors.

Stainless Steel Anchor Clips

12" wide 20 gauge base with two stainless steel clips designed to keep upward pressure on the coping cover. These are spaced 6' on center and attached by #12 x 1 5/8" hex head fasteners with neoprene washers, furnished with the system. Special approved masonry fasteners are also available on special order.

Coping Cover

12 foot lengths are available in 0.040", 0.050", 0.063" and 0.080" aluminum; 22 and 24 gauge galvanized. Aluminum is standard in mill finish, Kynar 500 finish, clear and colored anodized; galvanized is plain or Kynar finish.

Concealed Splice Plate

8" wide plate with dual butyl sealant strips of color and metal to match the coping cover. These are placed over every other anchor clip, under the coping cover joint. Cover plate joints are spaced 3/8" apart.

Coping Extenders

Available in lengths from 5" to 12½" in metal to match the coping cover. Extenders are hooked at the bottom to a continuous cleat, fastened 12" on center. Top is fastened 12" on center.

Accessories

Factory fabricated corners, end caps, tees, scuppers, sumps and down-spouts are available with "quicklock" or welded seams.