References - Page 13

7550 Guide Specifications:

Modified Bitumen/Cap Sheet Roof System

III. GENERAL

A. Section Includes

1. Cleaning deck surface.

2. [Vapor retarder.]

3. [Roof insulation.]

4. Modified Bitumen Roofing System with Modified Base Flashings.

5. Traffic pads.

B. Related Sections

1. Section [_____ __________:] Roof deck.

2. Section [06001 Carpentry Work:] [06114 Wood Blocking and Curbing:] Wood nailers[.] [and cants.]

3. Section 07620 Sheet Metal Flashing and Trim: Weather protection to base flashings.

4. Section 07710 Prefabricated Roof Specialties.

5. Section 07724 Roof Hatches.

6. Section 07810 Plastic Skylights: Skylight frame[.] [and integral curb.]

7. Section [_____ __________:] Prefabricated curb for mechanical equipment.

8. Section 16670 Lightning Protection Systems.

C. References

1. ASTM D 41 Asphalt Primer Used in Roofing, Dampproofing and Waterproofing.

2. ASTM D 312 Asphalt Used in Roofing.

3. ASTM D 1863 Mineral Aggregate Used on Built-Up Roofs.

4. ASTM D 2178 Type [VI] [IV] Asphalt Glass Felt Used in Roofing and Waterproofing.

5. ASTM D 4586 Type II, Asphalt Roof Cement, Asbestos Free.

6. ASTM D 4897 Type II, Asphalt Coated, Glass Fiber Venting Base Sheet Used in Roofing.

7. ASTM D 4601 Type II, Asphalt Coated, Glass Fiber Base Sheet Used in Roofing.

8. ASTM D 6162 Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements.

9. ASTM D 6163 Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements.

10. ASTM D 6164 Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements.

11. ASTM C 726 Mineral Fiber Roof Insulation Board (Fiber Glass).

12. ASTM C 728 Perlite Thermal Insulation Board.

13. ASTM C 1289 Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board.

14. FM (Factory Mutual Research Corporation) Current Edition Approval Guide, Roof Coverings.

15. UL (Underwriters Laboratories) Roofing Materials and Systems Directory, Fire Resistance Directory, Current Edition.

D. System Description

1. Roofing System: [Two] [Three] [Four] ply hot asphalt applied roofing system with SBS mineral surfaced modified bitumen cap sheet.

2. Manufacturer’s Specification Designation: JM Specification [2CID] [3CID] [4CID] [2CND] [3CND] [4CND] [2FID] [3FID] [4FID] [2FND] [3FND] [4FND] [2PID] [3PID] [4PID] [2PND] [3PND] [4PND].

E. System Performance

1. Roofing System: Prevent water migration from entering building through the roof membrane.

2. All materials shall be from one manufacturer.