Guarantees

APP Modified Bitumen Roofing Systems Guarantees: Heat-Welded Systems

System	Term	Membrane Materials	Dollar Limit	Insulation Substrate	Membrance Spec.	Notes
	20 Years	Tricor M FR over Bicor over JM APP Base, APPeX 4.5 M or M FR over APPeX 4S over JM APP Base, APPeX 4.5M or M FR over 2 layers of APPeX 4S, or 2 plies of GPP in Asphalt	NDL		4GIG, 4GIS, 5GIC (Regions 2 & 3 only), 4GIC (Region 3 only)	1. GlasPly Premier is the only acceptable ply felt. 2. New construction or complete tear off only. 3. Insulation must be installed as shown. 4. Tricor M FR over JM APP Base Sheet is the required flashing. 1. Top layer – Fesco. 2. 2 plies GlasPly Premier in asphalt.
	15  Years	Tricor M FR over JM APP Base, APPeX 4.5M or M FR over APPeX 4S	NDL		2CIN-W, 2PIN-W	1. Contact Technical Service Specialist for recover approval and for approved substrate. 2. Insulation must be installed as shown. 3. 15 year guarantees require Tricor M FR over JM APP Base Sheet as flashing. APPeX 4.5M, Bicor, or APPeX 4S are acceptable flashing for 10 and 12 year guarantees.
	12 Years	Any guaranteeable JM APP products over JM APP Base Sheet	NDL		2PIN-W 3PIN-W
	12 Years or 10 Years	Any guarantee-able JM APP products over GlasBase fastened with insulation	Full Value  or NDL	None: (approved substrates only)	2PIN-W 2PBS-W 2PIS-W 2PBS-W
	10 Years	Any guaranteeable JM APP products over PP28 fastened with insulation, 1 layer of any guaranteeable JM APP products	Full Value		All 3, 4, 5 ply BUR specs (3 ply nailed specs, 5 year only)	1. GlasTite Flexible must be coated with an approved coating. 2. Contact Technical Service Specialist for recover approval and for approved substrates.
				None: (approved substrates only)

• NDL Guarantees are available only to NDL approved contractors.
• Full Value equals the original installed cost of the JM materials and the labor to install them.
• Full Value does not include the costs for tear-off, non-JM material or labor to install non-JM material mat. UltraFast insulation fasteners must be used.
• UltraFast and/or GlasFast must be used.
• Nord Board must be used when heat welding directly to insulation.
• APPeX 180 and APPeX Black Bear are available for Material Warranties only.
• Smooth surface membranes and flashing must be coated with an approved JM coating.
• Flashing must be installed over FesCant Plus cant strips.
• Re-Cover specs require the use of 1/2" Nord Board or mechanically fastened GlasBase Sheet.