|
Products |
SBS Modified Bitumen Roofing Systems
Submittal Data Sheets
DynaKap®
Description
DynaKap is an elastomeric modified bitumen sheet incorporating the features of a strong composite fiber
glass/polyester mat. The composite reinforcement is coated with a blend of SBS (Styrene-Butadiene-Styrene)
rubber and high quality asphalt. The elastomeric asphalt blend has full recovery properties after 100% elongation
and lends elasticity and flexibility to the sheet. The inorganic fiber glass reinforcement in conjunction with the
polyester provides stability, toughness and puncture resistance to the product and resists moisture absorption. The
reinforcement also provides high tensile strength and affords better natural resistance to the other factors which
affect roof performance. The covering layer of ceramic-coated roofing granules, black or white, provides durability,
superior resistance to damage from weather and foot traffic.
Use
DynaKap is designed for use as a premium modified bitumen sheet in multiple ply roofing systems. It is ideal for low
slope applications (inclines up to ½" per foot [41.6 mm/m]), and is recommended for this application with Types III
and IV asphalt. For slopes from ½" to 3" per foot (41.6 to 250 mm/m), only Type IV asphalt is recommended.
Because of its superior weatherability, durability and handling characteristics, DynaKap may be used both for a
finished cap sheet and as a flashing material. However, we require using DynaFlex® for flashing applications in
many specifications. DynaKap may also be installed in JM MBR® Bonding Cement or JM MBR® Cold Application
Adhesive. This product is not to be installed using heat-welding application techniques.
Advantages
- Combining a superior composite reinforcement with a durable SBS blend ensures long term performance in
the harshest roof-top environments
- The elongation and recovery properties of the SBS blend allow the product to easily accommodate the
continual expansion and contraction strains experienced on all roofs
- The exceptional weathering provided by its granular surfacing, coupled with a tough, puncture-resistant fiber
glass/polyester composite reinforcement enables the product to easily withstand the rigors of rooftop traffic
- The product’s flexibility and dimensional stability provide ease of handling, resulting in quick installations
Typical Physical Properties*
Material meets or exceeds the criteria for ASTM D 6162, Type I, Grade G.
Thickness ............................................................. 0.158 inches (4 mm)
Tensile Strength @ 0°F (-18°C)
Machine Direction ............... 150 lbs. force/in. width (26.3 kN/m)
Cross Machine Direction ... 105 lbs. force/in. width (18.4 kN/m)
Elongation @ 0°F (-18°C)
Machine Direction................................................................... 4.0%
Cross Machine Direction ....................................................... 4.0%
Tensile-Tear
Machine Direction..................................... 150 lbs./in. (26.3 kN/m)
Cross Machine Direction ......................... 125 lbs./in. (21.9 kN/m)
Low Temperature Flexibility ............................................... -10°F (-23°C)
Dimensional Stability
Machine Direction ...................................................... 0.20% change
Cross Machine Direction........................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials.
Sizes
Roll size ....................................................................... 1 square (9.29 m2)
Roll weight ...................................................................... 115 lbs (51.8 kg)
Roll length ............................................................................ 32' 10" (10 m)
Roll width ................................................................................. 39 3/8" (1 m)
Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this
data sheet ask for RS-4100.
DynaKap® FR
Description
DynaKap FR is a fire resistant, elastomeric modified bitumen sheet incorporating the features of a strong
composite fiber glass/polyester mat. The composite reinforcement is coated with a blend of SBS
(Styrene-Butadiene-Styrene) rubber, high quality asphalt and fire-retardant additives. The elastomeric asphalt blend
has full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet. The inorganic fiber
glass reinforcement, in conjunction with the polyester, provides stability, toughness and puncture resistance to the
product and resists moisture absorption. The reinforcement also provides high tensile strength and affords better
natural resistance to the other factors which affect roof performance. The covering layer of ceramic-coated roofing
granules, black or white, provides durability along with superior resistance to damage from weather and foot traffic.
Use
DynaKap FR is designed for use as a premium modified bitumen sheet in UL fire rated, multiple ply roofing
systems. DynaKap FR, unlike many modified bitumen products, enjoys UL Class A ratings in numerous
constructions, both new and reroof, without the use of additional surfacings. It is ideal for low slope applications
(inclines up to ½" per foot [41.6 mm/m]), and is recommended for this application with Types III and IV asphalt. For
slopes from ½" to 3" per foot (41.6 to 250 mm/m), only Type IV asphalt is recommended.
DynaKap FR may also be installed in JM MBR® Bonding Cement or JM MBR® Cold Application Adhesive. Because
of its superior weatherability, durability and handling characteristics, DynaKap FR may be used both for a finished
cap sheet and as a flashing material. However, we require using DynaFlex® for flashing applications in many
specifications. This product is not to be installed using heat-welding application techniques.
Advantages
- Combining a superior composite reinforcement with a durable SBS blend ensures long-term performance in
the harshest roof-top environments
- The elongation and recovery properties of the SBS blend allows the product to easily accommodate the
continual expansion and contraction strains experienced on all roofs
- The exceptional weathering provided by its granular surfacing, coupled with a tough, puncture-resistant fiber
glass/polyester composite reinforcement, enables the product to easily withstand the rigors of rooftop traffic
- The product’s flexibility and dimensional stability provide ease of handling, resulting in quick installations
- Fire-retardant formulation
Typical Physical Properties*
Material meets or exceeds the criteria for ASTM D 6162, Type I, Grade G.
Thickness ................................................................ 0.158 inches (4 mm)
Tensile Strength @ 0°F (-18°C)
Machine Direction ................ 150 lbs. force/in. width (26.3 kN/m)
Cross Machine Direction ..... 105 lbs. force/in. width (18.4 kN/m)
Elongation @ 0°F (-18°C)
Machine Direction..................................................................... 4.0%
Cross Machine Direction ........................................................ 4.0%
Tensile-Tear
Machine Direction...................................... 150 lbs./in. (26.3 kN/m)
Cross Machine Direction .......................... 125 lbs./in. (21.9 kN/m)
Low Temperature Flexibility ................................................ -10°F (-23°C)
Dimensional Stability
Machine Direction .................................................... 0.20% change
Cross Machine Direction.......................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials.
Sizes
Roll size ........................................................................ 1 square (9.29 m2)
Roll weight ...................................................................... 115 lbs (51.8 kg)
Roll length ............................................................................ 32' 10" (10 m)
Roll width ............................................................................ 39 3 Ú8 " (1 m)
Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this
data sheet ask for RS-4101.
DynaPly®
Description
DynaPly is an elastomeric modified bitumen sheet incorporating the features of a strong composite fiber
glass/polyester mat. The composite reinforcement is coated with a blend of SBS (Styrene-Butadiene-Styrene)
rubber and high quality asphalt. The elastomeric asphalt blend has full recovery properties after 100% elongation
and lends elasticity and flexibility to the sheet. The inorganic fiber glass reinforcement in conjunction with the
polyester provides stability, toughness and puncture resistance to the product and resists moisture absorption. The
reinforcement also provides high tensile strength and affords better natural resistance to the other factors which
affect roof performance. This product does not have a surface finish and must be used in constructions that will
provide protection from UV (ultraviolet light) and the elements. A fine mineral parting agent is applied to both sides
of the product.
Use
DynaPly is designed for use as a top modified bitumen sheet in multiple ply roofing systems where additional
surface treatment is required, i.e., Protected Roof Membranes, systems surfaced with asphalt and gravel or
protective coatings. It is ideal for low slope applications (inclines up to ½" per foot [41.6 mm/m]), and is
recommended for this application with Types III and IV asphalt. For slopes from ½" to 3" per foot (41.6 to 250
mm/m), only Type IV asphalt is recommended. DynaPly may also be installed in JM MBR® Bonding Cement or JM
MBR® Cold Application Adhesive. This product is not to be installed using heat-welding application techniques.
A d v a n t a g e s
- Combining a superior composite reinforcement with a durable SBS blend ensures long-term performance in
the harshest roof-top environments
- The elongation and recovery properties of the SBS blend allow the product to easily accommodate the
continual expansion and contraction strains experienced on all roofs
- The combination of a tough, puncture-resistant fiber glass/polyester composite reinforcement allows the
product to easily withstand the rigors of rooftop traffic
- The product’s flexibility and dimensional stability provide ease of handling, resulting in quick installations
Typical Physical Properties*
Material meets or exceeds the criteria for ASTM D 6162, Type I, Grade S.
Thickness.............................................................. 0.125 inches (3.2 mm)
Tensile Strength @ 0°F (-18°C)
Machine Direction .................. 150 lbs. force/in. width (26.3 kN/m)
Cross Machine Direction ...... 105 lbs. force/in. width (18.4 kN/m)
Elongation @ 0°F (-18°C)
Machine Direction...................................................................... 4.0%
Cross Machine Direction .......................................................... 4.0%
Tensile-Tear
Machine Direction...................................... 150 lbs./in. (26.3 kN/m)
Cross Machine Direction .......................... 125 lbs./in. (21.9 kN/m)
Low Temperature Flexibility ................................................ -10°F (-23°C)
Dimensional Stability
Machine Direction ..................................................... 0.20% change
Cross Machine Direction.......................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials.
Sizes
Roll size ....................................................................... 1 square (9.29 m2)
Roll weight ........................................................................ 90 lbs (40.8 kg)
Roll length ............................................................................ 32' 10" (10 m)
Roll width ................................................................................. 39 3/8" (1 m)
Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this
data sheet ask for RS-4102.
DynaMax™
Description
DynaMax is an elastomeric, modified bitumen sheet. It incorporates the features of a woven fiber glass and
spunbonded polyester mat laminate reinforcement that is saturated and coated with a 22% blend of SBS
(Styrene-Butadiene-Styrene) and/or SEBS (Styrene-Ethylene-Butadiene-Styrene) polymer and high quality asphalt.
The elastomeric asphalt blend has full recovery properties after 100% elongation and lends a high degree of
elasticity and flexibility to the sheet. DynaMax has a construction that provides an extremely durable sheet with
excellent weathering properties. The elastomeric asphalt blend is formulated to provide excellent physical properties
for ease of installation and long-term roof performance. The inorganic fiber glass and polyester reinforcement
provides very high tensile strength, stability and toughness to the product. The covering layer of ceramic-coated
roofing granules, white or black, provides durability along with superior resistance to damage from weather and foot
traffic. The white granular surface also provides heat reflectance.
Use
DynaMax is designed for use as a premium modified bitumen cap sheet. It is ideal for low-slope applications
(inclines up to ½" per foot [41.6 mm/m]), and is recommended for this application with Types III and IV asphalt. For
slopes from ½" to 3" per foot (41.6 to 250 mm/m), only Type IV asphalt is recommended. DynaMax may also be
installed in JM MBR® Bonding Cement or JM MBR® Cold Application Adhesive.
Advantages
- The reinforcement provides for superior tensile properties, good dimensional stability, good puncture and tear
resistance
- The premium quality, high polymer content SBS/SEBS blend allows for excellent weathering characteristics
- The product’s flexibility provides for ease of handling and quick installation
Typical Physical Properties*
Material meets or exceeds the criteria for ASTM D 6162, Type III, Grade G.
Thickness ............................................................ 0.158 inches (4.0 mm)
Tensile Strength @ 0°F (-18°C)
Machine Direction ................ 300 lbs. force/in. width (52.5 kN/m)
Cross Machine Direction ..... 300 lbs. force/in. width (52.5 kN/m)
Elongation @ 0°F (-18 °C)
Machine Direction ...................................................................... 4%
Cross Machine Direction ........................................................... 4%
Tensile-Tear
Machine Direction .................................... 350 lbs./in. (61.3 kN/m)
Cross Machine Direction ......................... 350 lbs./in. (61.3 kN/m)
Low Temperature Flexibility ............................................... -15°F (-26°C)
Dimensional Stability
Machine Direction .................................................... 0.20% change
Cross Machine Direction ......................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials.
Sizes
Roll size ..................................................................... 1 square (9.29 m2)
Roll weight ...................................................................... 99 lbs (44.9 kg)
Roll length .......................................................................... 32' 10" (10 m)
Roll width ............................................................................ 39 3/8" (1.0 m)
Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this
data sheet ask for RS-4114.
DynaMax™ FR
Description
DynaMax FR is a fire-retardant, elastomeric, modified bitumen sheet. It incorporates the features of a woven fiber
glass and spun-bonded polyester mat laminate reinforcement that is saturated and coated with a blend of SBS
(Styrene-Butadiene-Styrene) rubber, high quality asphalt and fire-retardant additives. The elastomeric asphalt blend
has full recovery properties after 100% elongation and lends a high degree of elasticity and flexibility to the sheet.
DynaMax FR has a construction that provides an extremely durable sheet with excellent weathering properties. The
elastomeric asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term
roof performance.
The inorganic fiber glass and polyester reinforcement provides very high tensile strength, stability and toughness to
the product. The covering layer of ceramic-coated roofing granules, white or black, provides durability along with
superior resistance to damage from weather and foot traffic. The white granular surface also provides heat
reflectance.
Use
DynaMax FR is designed for use as a premium modified bitumen cap sheet. It is ideal for low-slope applications
(inclines up to ½" per foot [41.6 mm/m]), and is recommended for this application with Types III and IV asphalt. For
slopes from ½" to 3" per foot (41.6 to 250 mm/m), only Type IV asphalt is recommended. UL Class A ratings may be
obtained in numerous constructions, both new and reroof at slopes up to 1" per foot (83 mm/m). DynaMax FR may
also be installed in JM MBR® Bonding Cement or JM MBR® Cold Application Adhesive.
Advantages
- The reinforcement provides for superior tensile properties, good dimensional stability, good puncture and tear
resistance
- The premium quality SBS blend allows for excellent weathering characteristics
- The product’s flexibility provides for ease of handling and quick installation
Typical Physical Properties*
Material meets or exceeds the criteria for ASTM D 6162, Type III, Grade G.
Thickness ............................................................ 0.177 inches (4.5 mm)
Tensile Strength @ 0°F (-18 °C)
Machine Direction ................ 300 lbs. force/in. width (52.5 kN/m)
Cross Machine Direction ...... 300 lbs. force/in. width (52.5 kN/m)
Elongation @ 0°F (-18 °C)
Machine Direction ..................................................................... 4%
Cross Machine Direction .......................................................... 4%
Tensile-Tear
Machine Direction ................................... 350 lbs./in. (61.3 kN/m)
Cross Machine Direction ........................ 350 lbs./in. (61.3 kN/m)
Low Temperature Flexibility ............................................. -15°F (-26 °C)
Dimensional Stability
Machine Direction .................................................. 0.20% change
Cross Machine Direction ....................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials.
Sizes
Roll size ................................................................... 1 square (9.29 m2)
Roll weight .................................................................. 116 lbs (52.6 kg)
Roll length ........................................................................ 32' 10" (10 m)
Roll width .......................................................................... 39 3/8" (1.0 m)
Refer to the Material Safety Data Sheet and Product Label priorto using this product. For an identical copy of this
data sheet ask for RS-4113.
Dyna Glas®
Description
DynaGlas is an elastomeric, modified bitumen sheet incorporating the features of a strong fiber glass mat with a
blend of SBS (Styrene-Butadiene-Styrene) rubber and high quality asphalt. The elastomeric asphalt blend has full
recovery properties after 100% elongation and lends elasticity and flexibility to the sheet. The inorganic fiber glass
reinforcement provides high tensile strength, stability and toughness to the product and resists moisture absorption.
These properties also afford the product better natural resistance to the other factors which affect roof performance.
The covering layer of ceramic-coated roofing granules, black or white, provides durability along with superior
resistance to damage from weather and foot traffic.
Use
DynaGlas is designed for use as a quality modified bitumen sheet in multiple ply roofing systems. It is ideal for low
slope applications (inclines up to ½" per foot [41.6 mm/m]), and is recommended for this application with Types III
and IV asphalt. For slopes from ½" to 3" per foot (41.6 to 250 mm/m), only Type IV asphalt is recommended.
Because of its superior weatherability, durability and handling characteristics, DynaGlas may be used both for a
finished cap sheet and as a flashing material. However, we require using DynaFlex® for flashing applications in
many specifications. DynaGlas may also be installed in JM MBR® Bonding Cement or JM MBR® Cold Application
Adhesive. This product is not to be installed using heat-welding application techniques.
Advantages
- The heavy fiber glass mat provides exceptional tensile strength and puncture resistance
- The elongation and recovery properties of the SBS blend allow the product to easily accommodate the
continual expansion and contraction strains experienced on all roofs
- The product’s flexibility and dimensional stability provide ease of handling, resulting in quick installations
Typical Physical Properties*
Material meets or exceeds the criteria for ASTM D 6163, Type I, Grade G.
Thickness............................................................ 0.150 inches (3.8 mm)
Tensile Strength @ 0°F (-18°C)
Machine Direction .............. 135 lbs. force/in. width (23.6 kN/m)
Cross Machine Direction ..... 95 lbs. force/in. width (16.6 kN/m)
Elongation @ 0°F (-18°C)
Machine Direction .................................................................... 4%
Cross Machine Direction ......................................................... 4%
Tensile-Tear
Machine Direction................................... 125 lbs./in. (21.9 kN/m)
Cross Machine Direction ....................... 100 lbs./in. (17.5 kN/m)
Low Temperature Flexibility ............................................ -10°F (-23°C)
Dimensional Stability
Machine Direction ................................................. 0.20% change
Cross Machine Direction....................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials. The physical properties shown represent typical values.
Sizes
Roll size ........................................................................ 1 square (9.29m2)
Roll weight ...................................................................... 100 lbs (45.4 kg)
Roll length ............................................................................ 32' 10" (10 m)
Roll width ................................................................................. 39 3/8" (1 m)
Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this
data sheet ask for RS-4103.
Dyna Glas® FR
Description
DynaGlas FR is a fire resistant modified bitumen sheet incorporating the features of a strong fiber glass mat with a
blend of SBS (Styrene-Butadiene-Styrene) rubber, high quality asphalt and fire-retardant additives. The elastomeric
asphalt blend has full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet. The
inorganic fiber glass reinforcement provides tensile strength, stability and toughness to the product and resists
moisture absorption. These properties also afford the product better natural resistance to the other factors which
affect roof performance. The covering layer of ceramic-coated roofing granules, black or white, provides durability
along with superior resistance to damage from weather and foot traffic.
Use
DynaGlas FR is designed for use as a quality modified bitumen sheet in UL fire rated, multiple ply roofing systems.
DynaGlas FR, unlike many modified bitumen products, enjoys UL Class A ratings in numerous constructions, both
new and reroof, without the use of additional surfacings. It is ideal for low slope applications (inclines up to ½" per
foot [41.6 mm/m]), and is recommended for this application with Types III and IV asphalt. For slopes from ½" to 3"
per foot (41.6 to 250 mm/m), only Type IV asphalt is recommended.
Because of its superior weatherability, durability and handling characteristics, DynaGlas FR may be used both for a
finished cap sheet and as a flashing material. However, we require using DynaFlex® for flashing applications in
many specifications. DynaGlas FR may also be installed in JM MBR® Bonding Cement or JM MBR® Cold
Application Adhesive. This product is not to be installed using heat-welding application techniques.
Advantages
- The heavy fiber glass mat provides exceptional tensile strength and puncture resistance
- The elongation and recovery properties of the SBS blend allow the product to easily accommodate the
continual expansion and contraction strains experienced on all roofs
- The product’s flexibility and dimensional stability provide ease of handling, resulting in quick installations
- Fire-retardant formulation
Typical Physical Properties*
Material meets or exceeds the criteria for ASTM D 6163, Type I, Grade G.
Thickness.............................................................. 0.150 inches (3.8 mm)
Tensile Strength @ 0°F (-18°C)
Machine Direction ................ 135 lbs. force/in. width (23.6 kN/m)
Cross Machine Direction ....... 95 lbs. force/in. width (16.6 kN/m)
Elongation @ -0°F (-18°C)
Machine Direction ....................................................................... 4%
Cross Machine Direction ............................................................ 4%
Tensile-Tear
Machine Direction ..................................... 125 lbs./in. (21.9 kN/m)
Cross Machine Direction .......................... 100 lbs./in. (17.5 kN/m)
Low Temperature Flexibility .............................................. -10°F (-23°C)
Dimensional Stability
Machine Direction .................................................... 0.20% change
Cross Machine Direction.......................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials.
Sizes
Roll size ....................................................................... 1 square (9.29 m2)
Roll weight ...................................................................... 101 lbs (45.8 kg)
Roll length ............................................................................ 32' 10" (10 m)
Roll width ................................................................................. 39 3/8" (1 m)
Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this
data sheet ask for RS-4104.
Dyna Glas® 30 FR
Description
DynaGlas 30 FR is a fire resistant modified bitumen sheet incorporating the features of a fiber glass mat with a
blend of SBS (Styrene-Butadiene-Styrene) rubber, high quality asphalt and fire-retardant additives. The elastomeric
asphalt blend has full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet. The
inorganic fiber glass reinforcement provides tensile strength, stability and toughness to the product and resists
moisture absorption. These properties also afford the product better natural resistance to the other factors which
affect roof performance. The covering layer of ceramic-coated roofing granules, black or white, provides durability
along with superior resistance to damage from weather and foot traffic. White granules also provide heat
reflectance.
Use
DynaGlas 30 FR is designed for use as a quality modified bitumen sheet in UL fire rated, multiple ply roofing
systems. (Typically, it is used in conjunction with DynaBase® , a modified bitumen base sheet.) DynaGlas 30 FR,
unlike many modified bitumen products, enjoys UL Class A ratings in numerous constructions, both new and reroof,
without the use of additional surfacings. It is ideal for low slope applications (inclines up to ½" per foot [41.6 mm/m]),
and is recommended for this application with Types III and IV asphalt. For slopes from ½" to 3" per foot (41.6 to 250
mm/m), only Type IV asphalt is recommended. DynaGlas 30 FR may also be installed in JM MBR® Bonding Cement
or JM MBR® Cold Application Adhesive. This product is not to be installed using heat-welding application
techniques.
Advantages
- The fiber glass mat provides exceptional tensile strength and puncture resistance
- The elongation and recovery properties of the SBS blend allow the product to easily accommodate the
continual expansion and contraction strains experienced on all roofs
- The product’s flexibility and dimensional stability provide ease of handling, resulting in quick installations
- Fire-retardant formulation
Typical Physical Properties*
Material meets or exceeds the criteria of ASTM D 6163, Type I, Grade G.
Thickness........................................................ 0.130 inches (3.3 mm)
Tensile Strength @ 0°F (-18°C)
Machine Direction ............. 95 lbs. force/in. width (16.6 kN/m)
Cross Machine Direction .. 85 lbs. force/in. width (14.9 kN/m)
Elongation @ 0°F (-18°C)
Machine Direction............................................................... 3.0%
Cross Machine Direction ................................................... 3.0%
Tensile-Tear
Machine Direction ............................... 100 lbs./in. (17.5 kN/m)
Cross Machine Direction ...................... 90 lbs./in. (15.8 kN/m)
Low Temperature Flexibility ......................................... -10°F (-23°C)
Dimensional Stability
Machine Direction .............................................. 0.20% change
Cross Machine Direction.................................... 0.20% change
* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified
Bituminous Sheet Materials. The physical properties shown represent typical values.
Sizes
Roll size ..................................................................... 1 square (9.29 m2)
Roll weight ...................................................................... 90 lbs (40.8 kg)
Roll length .......................................................................... 32' 10" (10 m)
Roll width ............................................................................... 39 3/8" (1 m)
Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this
data sheet ask for RS-4105.
