Products - Page 7

APP/PAO Modified Bitumen Roofing Products
Submittal Data Sheets

TRICOR™ MFR

Description

TRICOR M FR is a fire-retardant, APP modified bitumen sheet.  It incorporates the features of a specialized polyester mat and continuous glass fiber composite that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer, high quality asphalt and fire-retardant additives. TRICOR M FR has a construction that provides an extremely durable sheet with excellent weathering properties. The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.  The reinforcement provides superior tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.   The covering layer of ceramic-coated roofing granules provides durability along with superior resistance to damage from weather and foot traffic. The white granular surface also provides heat reflectance. The back of the sheet has a fine mineral surface for ease of heat welding or approved cold adhesive application.

Use

TRICOR M FR is designed for use as a premium, modified bitumen cap sheet. UL Class A ratings may be obtained in numerous constructions, both new and reroof at slopes up to 1" per foot (83 mm/m). Because of its excellent weatherability, durability and handling characteristics, TRICOR M FR may be used not only as a modified bitumen cap sheet but also as a flashing material.  This product may be installed using heat-welding application techniques or in JM MBR^® Cold Application Adhesive.

Advantages

• The fiber glass upper reinforcement provides excellent tensile and tear properties as well as fire resistance and dimensional strength
• The premium quality APP blend allows for excellent weathering characteristics
• The product’s flexibility provides for ease of handling and quick installation

---

Typical Physical Properties*

Thickness .......................................................... 0.177 inches (4.5 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction ............. 300 lbs. force/in. width (52.5 kN/m)
Cross Machine Direction .. 300 lbs. force/in. width (52.5 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction .............................................................. 4.7%
Cross Machine Direction ................................................... 5.3%

Tensile-Tear

Machine Direction ............................... 260 lbs./in. (45.5 kN/m)
Cross Machine Direction .................... 260 lbs./in. (45.5 kN/m)

Low Temperature Flexibility .......................................... 12°F (-11°C)

Dimensional Stability

Machine Direction .............................................. 0.10% change
Cross Machine Direction ................................... 0.10% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size ...................................... Approximately 1.0 square (10 m²)
Roll weight ............................................................ 106 lbs. (.48.1 kg)
Roll length ................................................................... 34' 1" (10.4 m)
Roll width ..................................................................... 39 ³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4307.

T R I C O R™ S

Description

TRICOR S is an APP modified bitumen sheet. It incorporates the features of a specialized polyester mat and continuous glass fiber composite that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer, and high quality asphalt. TRICOR S has a construction that provides an extremely durable sheet with excellent weathering properties. The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.  The reinforcement provides superior tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.  Both sides of the sheets are treated with a fine mineral surfacing to prevent blocking in the roll.

Use

TRICOR S is designed for use as a premium, modified bitumen cap sheet. When used as a cap sheet, the use of an approved surfacing is required. When coated with specific UL-listed coatings, UL Class A ratings may be obtained in numerous constructions, both new and reroof at slopes up to 3½" per foot (291 mm/m).  This product may be installed using heat-welding application techniques or JM MBR^® Cold Application Adhesive.

Advantages

• The fiber glass in the reinforcement provides excellent tensile and tear properties as well as fire resistance and dimensional strength.
• The premium quality APP blend allows for excellent weathering characteristics.
• The product’s flexibility and dimensional stability provide ease of handling, resulting in quick installations.

---

Typical Physical Properties*

Thickness ......................................................... 0.157 inches (4.0 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction ............. 300 lbs. force/in. width (52.5 kN/m)
Cross Machine Direction . 300 lbs. force/in. width (52.5 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction ............................................................... 4.7%
Cross Machine Direction .................................................... 5.3%

Tensile-Tear

Machine Direction ................................. 260 lbs./in. (45.5 kN/m)
Cross Machine Direction ...................... 260 lbs./in. (45.5 kN/m)

Low Temperature Flexibility ............................................. 10°F (-12°C)

Dimensional Stability

Machine Direction ................................................. 0.10% change
Cross Machine Direction ...................................... 0.10% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size ............................................ Approximately 1.0 square (10 m²)
Roll weight ...................................................................... 94 lbs. (42.6 kg)
Roll length .......................................................................... 34' 1" (10.4 m)
Roll width .............................................................................. 39³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask   for RS-4337.

BICOR™ S

Description

BICOR S is an APP modified bitumen sheet. It incorporates the features of a durable, polyester composite and a heavy glass fiber mat that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer and high quality asphalt. BICOR S has a construction that provides an extremely durable sheet with excellent weathering properties. The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.   The reinforcement provides high tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.   Both sides of the sheets are treated with a fine mineral surfacing to prevent blocking in the roll.

Use

BICOR S is designed for use as a premium, modified bitumen sheet either as a cap sheet or as an interply sheet in a multiple-ply roofing system. When used as a cap sheet, the use of an approved surfacing is required. When coated with specific UL-listed coatings, UL Class A ratings may be obtained in numerous constructions, both new and reroof at slopes up to 3½" per foot (291 mm/m).   This product may be installed using heat-welding application techniques or in JM MBR^®

Advantages

• The fiber glass mat reinforcement provides excellent tensile and tear properties as well as fire resistance and dimensional strength
• The premium quality APP blend allows for excellent weathering characteristics
• The product's flexibility and dimensional stability provide ease of handling, resulting in quick installations

---

Typical Physical Properties*

Thickness ........................................................ 0.157 inches (4.0 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction ........... 180 lbs. force/in. width (31.5 kN/m)
Cross Machine Direction..180 lbs. force/in. width (31.5 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction .............................................................. 4.0%
Cross Machine Direction ................................................... 3.5%

Tensile-Tear

Machine Direction ............................... 163 lbs./in. (28.5 kN/m)
Cross Machine Direction .................... 195 lbs./in. (34.1 kN/m)

Low Temperature Flexibility ............................................. 9°F (-13°C)

Dimensional Stability

Machine Direction ................................................ 0.10% change
Cross Machine Direction ..................................... 0.10% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size ........................................ Approximately 1.0 square (10 m²)
Roll weight .................................................................. 90 lbs. (40.8 kg)
Roll length ...................................................................... 34' 1" (10.4 m)
Roll width ......................................................................... 39³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4339.

APPeX™ 4.5M FR

Description

APPeX 4.5M FR is a fire-retardant APP modified bitumen sheet. It incorporates the features of a tough, 180 g/m², nonwoven, polyester mat that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer, high quality asphalt and fire-retardant additives.   APPeX 4.5M FR has a construction that provides an extremely durable sheet with excellent weathering properties. The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.   The polyester mat provides good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.   The covering layer of ceramic-coated roofing granules provides durability along with superior resistance to damage from weather and foot traffic. The white granular surface also provides heat reflectance. The back of the sheet has a printed polyolefin film adhered to a diamond-embossed, textured surface for ease of heat welding.

Use

APPeX 4.5M FR is designed for use as a premium modified bitumen cap sheet. UL Class A ratings may be obtained in numerous constructions, both new and reroof at slopes up to 1" per foot (83 mm/m).   Because of its excellent weatherability, durability and handling characteristics, APPeX 4.5M FR may be used not only as a modified bitumen cap sheet but also as a flashing material. This product may only be installed using heat-welding application techniques.

Advantages

• The polyester mat provides excellent puncture and tear resistance
• The premium quality APP blend allows for excellent weathering characteristics
• The premium thickness sheet combined with the premium quality APP blend allows for the maximum overall sheet performance

---

Typical Physical Properties*

Thickness .......................................................... 0.177 inches (4.5 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction .............. 155 lbs. force/in. width (27.1 kN/m)
Cross Machine Direction .. 106 lbs. force/in. width (18.6 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction .................................................................. 38%
Cross Machine Direction ....................................................... 42%

Tensile-Tear

Machine Direction ................................... 161 lbs./in. (28.2 kN/m)
Cross Machine Direction ........................141 lbs./in. (24.7 kN/m)

Low Temperature Flexibility ............................................... 12°F (-11°C)

Dimensional Stability

Machine Direction ................................................... 0.90% change
Cross Machine Direction ........................................ 0.60% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size ...................................... Approximately 1.0 square (10 m²)
Roll weight .............................................................. 112 lbs. (50.8 kg)
Roll length .................................................................. 32' 10" (10.0 m)
Roll width .................................................................. 39 ³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4305.

APPeX™ 4.5M

Description

APPeX 4.5M is an APP modified bitumen sheet. It incorporates the features of a tough, 180 g/m², non-woven, polyester mat that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer and high quality asphalt.  APPeX 4.5M has a construction that provides an extremely durable sheet with excellent weathering properties. The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.  The polyester mat provides good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.  The covering layer of ceramic-coated roofing granules provides durability along with superior resistance to damage from weather and foot traffic. The white granular surface also provides heat reflectance. The back of the sheet has a printed polyolefin film adhered to a diamond-embossed, textured surface for ease of heat welding.

Use

APPeX 4.5M is designed for use as a premium modified bitumen cap sheet. Because of its excellent weatherability, durability and handling characteristics, APPeX 4.5M may be used not only as a modified bitumen cap sheet but also as a flashing material.  This product may only be installed using heat-welding application techniques.

Advantages

• The polyester mat provides excellent puncture and tear resistance
• The premium quality APP blend allows for excellent weathering characteristics
• The premium thickness sheet combined with the premium quality APP blend allows for the maximum overall sheet performance

---

Typical Physical Properties*

Thickness ........................................................ 0.177 inches (4.5 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction ............ 151 lbs. force/in. width (26.4 kN/m)
Cross Machine Direction.. 105 lbs. force/in. width (18.4 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction ................................................................. 38%
Cross Machine Direction ...................................................... 42%

Tensile-Tear

Machine Direction ................................. 175 lbs./in. (30.6 kN/m)
Cross Machine Direction ...................... 143 lbs./in. (25.0 kN/m)

Low Temperature Flexibility .............................................. 12°F (-11°C)

Dimensional Stability

Machine Direction .................................................. 0.90% change
Cross Machine Direction ....................................... 0.60% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size ..................................... Approximately 1.0 square (10 m²)
Roll weight ..............................................................112 lbs. (50.8 kg)
Roll length ................................................................ 32' 10" (10.0 m)
Roll width ............................................................... 39³/8" (1.0 m )

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4302.

APPeX™ 4M

Description

APPeX 4M is an APP modified bitumen sheet. It incorporates the features of a tough, 180 g/m², nonwoven, polyester mat that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer and high quality asphalt.  APPeX 4M has a construction that provides an extremely durable sheet with excellent weathering properties. The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.  The polyester mat provides good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.  The covering layer of ceramic-coated roofing granules provides durability along with superior resistance to damage from weather and foot traffic. The white granular surface also provides heat reflectance. The back of the sheet has a printed polyolefin film adhered to a diamond-embossed, textured surface for ease of heat welding.

Use

APPeX 4M is designed for use as a modified bitumen cap sheet.  Because of its excellent weatherability, durability and handling characteristics, APPeX 4M may be used not only as a modified bitumen cap sheet but also as a flashing material. This product may only be installed using heat-welding application techniques.

Advantages

• The polyester mat provides excellent puncture and tear resistance
• The premium quality APP blend allows for excellent weathering characteristics
• The product’s flexibility allows for ease of handling, resulting in quick application

---

Typical Physical Properties*

Thickness ........................................................ 0.157 inches (4.0 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction ........... 135 lbs. force/in. width (23.6 kN/m)
Cross Machine Direction .. 84 lbs. force/in. width (14.7 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction ................................................................ 39%
Cross Machine Direction ..................................................... 44%

Tensile-Tear

Machine Direction ................................ 151 lbs./in. (26.4 kN/m)
Cross Machine Direction ..................... 122 lbs./in. (21.4 kN/m)

Low Temperature Flexibility ............................................ 12°F (-11°C)

Dimensional Stability

Machine Direction ................................................ 0.90% change
Cross Machine Direction ..................................... 0.60% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size ........................................ Approximately 1.0 square (10 m²)
Roll weight .................................................................. 97 lbs. (44.0 kg)
Roll length ................................................................... 32' 10" (10.0 m)
Roll width ................................................................... 39³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4303.

APPeX™ Black Bear

Description

APPeX Black Bear is an APP modified bitumen sheet. It incorporates the features of a tough, 180 g/m², nonwoven, polyester mat that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer and high quality asphalt.  APPeX Black Bear has a construction that provides an extremely durable sheet with good weathering properties. The premium APP asphalt blend is formulated to provide good physical properties for ease of installation and long-term roof performance.  The polyester mat provides good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.  The covering layer of shiny black mineral provides durability along with superior resistance to damage from weather and foot traffic.  The back of the sheet has a printed polyolefin film adhered to a diamond-embossed, textured surface for ease of heat welding.

Use

APPeX Black Bear is designed for use as a modified bitumen cap sheet. This product may only be installed using heat-welding application techniques.

Advantages

• The polyester mat provides excellent puncture and tear resistance
• The premium quality APP blend allows for excellent weathering characteristics
• The fine black grit surface allows for exceptionally easy end lap treatment resulting in quick application

---

Typical Physical Properties*

Thickness ......................................................... 0.157 inches (4.0 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction ............ 140 lbs. force/in. width (24.5 kN/m)
Cross Machine Direction.... 90 lbs. force/in. width (15.8 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction ................................................................ 42%
Cross Machine Direction ..................................................... 47%

Tensile-Tear

Machine Direction ................................. 177 lbs./in. (31.0 kN/m)
Cross Machine Direction ...................... 147 lbs./in. (25.7 kN/m)

Low Temperature Flexibility .............................................. 12°F (-11°C)

Dimensional Stability

Machine Direction .................................................. 0.90% change
Cross Machine Direction ....................................... 0.60% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size .................................... Approximately 1.0 square (10 m²)
Roll weight .............................................................. 97 lbs. (44.0 kg)
Roll length ................................................................ 32' 10" (10.0 m)
Roll width ...................................................................... 39³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4304.

APPeX™ 5S

Description

APPeX 5S is an APP modified bitumen sheet. It incorporates the features of a tough, 180 g/m², non-woven, polyester mat that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer and high quality asphalt.  APPeX 5S has a construction that provides an extremely durable sheet with excellent weathering properties. The 0.197" (5.0 mm) thickness of the sheet makes it easier and more reliable to apply and also provides a thicker barrier against weathering agents.  The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.  The polyester mat provides good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces. The sheet has a light non-blocking surfacing. The back of the sheet has a printed polyolefin film.

Use

APPeX 5S is designed for use as a premium, modified bitumen sheet either as a cap sheet or as an interply sheet in a multiple-ply roofing system. When used as a cap sheet, the use of an approved surfacing is required. When coated with specific UL-listed coatings, UL Class A ratings may be obtained in numerous constructions, both new and reroof at slopes up to 3½" per foot (291 mm/m).   This product may only be installed using heat-welding application techniques.

Advantages

• The polyester mat provides excellent puncture and wear resistance
• The premium quality APP blend allows for excellent weathering characteristics
• The premium thickness sheet combined with the premium quality APP blend allows for the maximum overall sheet performance

---

Typical Physical Properties*

Thickness ...................................................... 0.197 inches (5.0 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction .......... 186 lbs. force/in. width (32.6 kN/m)
Cross Machine Direction  127 lbs. force/in. width (22.2 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction ............................................................... 40%
Cross Machine Direction .................................................... 40%

Tensile-Tear

Machine Direction ................................ 184 lbs./in. (32.2 kN/m)
Cross Machine Direction ..................... 165 lbs./in. (28.9 kN/m)

Low Temperature Flexibility ............................................ 14°F (-10°C)

Dimensional Stability

Machine Direction ............................................... 0.80% change
Cross Machine Direction .................................... 0.50% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size ................................................ Approximately ³/4" square (8 m²)
Roll weight ...................................................................... 92 lbs. (41.8 kg)
Roll length ............................................................................ 26' 3" (8.0 m)
Roll width .............................................................................. 39³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4300.

APPeX™ 4S

Description

APPeX 4S is an APP modified bitumen sheet. It incorporates the features of a tough, 180 g/m², non-woven, polyester mat that is saturated and coated with a blend of APP (Atactic Polypropylene) polymer and high quality asphalt.  APPeX 4S has a construction that provides an extremely durable sheet with excellent weathering properties. The premium APP asphalt blend is formulated to provide excellent physical properties for ease of installation and long-term roof performance.  The polyester mat provides good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.  The surface of the sheet has a light non-blocking surfacing.  The back of the sheet has a printed polyolefin film adhered to a diamond-embossed, textured surface for ease of heat welding.

Use

APPeX 4S is designed for use as a premium, modified bitumen sheet either as a cap sheet or as an interply sheet in a multiple-ply roofing system. When used as a cap sheet, the use of an approved surfacing is required. When coated with specific UL-listed coatings, UL Class A ratings may be obtained in numerous constructions, both new and reroof at slopes up to 3½" per foot (291 mm/m).   This product may only be installed using heat-welding application techniques.

Advantages

• The polyester mat provides excellent puncture and tear resistance
• The premium quality APP blend allows for excellent weathering characteristics
• The product's flexibility and dimensional stability provide ease of handling, resulting in quick installations

---

Typical Physical Properties*

Thickness .......................................................... 0.157 inches (4.0 mm)

Tensile Strength @ 0°F (-18 °C)

Machine Direction ...............181 lbs. force/in. width (31.7 kN/m)
Cross Machine Direction .. 121 lbs. force/in. width (21.2 kN/m)

Elongation @ 0°F (-18 °C)

Machine Direction .................................................................. 42%
Cross Machine Direction ...................................................... 46%

Tensile-Tear

Machine Direction .................................. 179 lbs./in. (31.3 kN/m)
Cross Machine Direction ....................... 149 lbs./in. (26.1 kN/m)

Low Temperature Flexibility .............................................. 10°F (-12°C)

Dimensional Stability

Machine Direction ................................................. 0.90% change
Cross Machine Direction ...................................... 0.60% change

* Material tested in accordance with ASTM D 5147 Standard Test Method for Sampling and Testing Modified Bituminous Sheet Materials.

Sizes

Roll size .................................... Approximately 1.0 square (10 m²)
Roll weight .............................................................. 92 lbs. (41.8 kg)
Roll length ............................................................... 32' 10" (10.0 m)
Roll width ..................................................................... 39³/8" (1.0 m)

Refer to the Material Safety Data Sheet and Product Label prior to using this product. For an identical copy of this data sheet ask for RS-4301.