Roof Insulations - Page 15

Tapered Fesco Board

Tapered Fesco uses only JM Fesco Board, a perlite-based thermal roof insulation designed for use over nailable, non-nailable or metal roof decks. It is especially adaptable to reroofing applications, where both improved thermal insulation and positive drainage must be achieved.

Tapered Fesco is supplied in 2' x 4' (0.61 m x 1.22 m) or 4' x 4' (1.22 m x 1.22 m) boards, custom cut and tapered to 1/16", 1 /8", 1/4", or 1/2" per foot (5.2, 10.4, 20.8, or 41.6 mm/m) slope depending on the need. Custom sizes are available.

Advantages

Environmentally Friendly. The minimum recycled content is 25% by weight.

Tapered Fesco Board complies with Environmental Protection Agency Regulation 40 CFR Part 248, Guideline for Federal Procurement of Building Insulation Products Containing Recovered Materials, as a recycled product approved for use on any project using federal funds.

Dimensional Stability. Because of its perlite composition and low water absorption rates, Fesco Board is dimensionally stable over a wide range of weather conditions.

Fire Resistance. Tapered Fesco Board has excellent fire resistance and is approved for use in FM and UL approved constructions. Because of its perlite content, Tapered Fesco offers far greater resistance than conventional wood fiber materials.

Stable R-Value. Tapered Fesco Board has a stable R-value because it is composed of inorganic and fibrous materials.

Labor Savings. Tapered Fesco in 4' x 4' (1.22 m x 1.22 m) panels can offer significant labor savings over 2' x 4' (0.61 m x 1.22 m) panels during application and installation.

Profiles

Tapered E’NRG’Y 2

Tapered E’NRG’Y 2 is a high thermal roof insulation board consisting of a core of rigid, closed-cell, polyisocyanurate foam, faced with a universal fiber glass reinforced facer. Tapered E’NRG’Y 2 is designed for both new construction and reroofing where ponding water or positive slope is a concern.

Tapered E’NRG’Y 2 is supplied in 4' x 4' (1.22 m x 1.22 m) boards and available in minimum 1/2" (13 mm) minimum to 4.0" (102 mm) thicknesses. Tapered E’NRG’Y 2 is manufactured to 1/16", 1/8", 1/4", or 1/2" per foot (5.2, 10.4, 20.8 or 41.6 mm/m) slope depending on the need. Custom sizes are available.

Advantages

Thermally Efficient. Tapered E’NRG’Y 2 is a highly efficient thermal insulation with high R-value and low installed cost.

Universal Facer. The universal facer on Tapered E’NRG’Y 2 is suited for use in many different membrane systems such as BUR, modified bitumen and single ply applications.

Environmentally Compliant. Tapered E’NRG’Y 2 is produced with 141b blowing agent, an HCFC (Hydrochlorofluorocarbon) chemical currently accepted as a replacement in the CFC phase-out process. Tapered E’NRG’Y 2 is in compliance with EPA requirements governing all materials produced after May 15, 1993. Tapered E’NRG’Y 2 meets the standards of the Clean Air Act Amendments of 1990.

Profiles