Homepage  
Search
find:
search for:
   
 
Site Navigation
News / Publications
Jobs
Service
   Add this page to Google Bookmarks
   Add this page to Mister Wong
   Add this page to del.icio.us
 
   Johns Manville  Commerical Industrial Roofing Systems\Roof Insulations  

Roof Insulations - Page 17

 

 

jmlogo.jpg (5180 bytes) Roof Insulations

Tapered Pre-Cut Crickets
FesCant Plus Cant Strip
sec904a.gif (413 bytes)
Tapered Fesco Edge Stripsec904a.gif (413 bytes)

sec917a.jpg (12989 bytes)

Tapered Pre-Cut Crickets

Tapered Pre-Cut Crickets are designed to direct water to a drain or scupper on a tapered roof system. These crickets consist of sloped insulation panels that are professionally designed, factory cut and packaged to your job specifications. These panels can be manufactured from either Tapered E’NRG’Y 2 or Tapered Fesco Foam composite panels, and are available in either 20 or 25 psi (138 or 172 kPa) compressive strength.

Using specialized computerized technology, Tapered Pre-Cut Crickets are designed, cut, packaged and delivered to the job ready for installation. The customized bundle labeling allows for easy onsite identification. This service minimizes field error, increases efficiencies and eliminates waste.

sec917b.gif (6845 bytes)

sec917c.jpg (44101 bytes)

FesCant Plus Cant Strip

FesCant Plus Cant Strips are an excellent way to transition from the deck to the wall of the roof. They are made from JM Cant Board, a high density, laminated board made of high strength fibers and expanded perlite. Because of its high perlite content, FesCant Plus Cant Strips offer far greater fire resistance than conventional wood fiber materials. This feature is important to all roofs, but especially applicable to torch-applied or heat weldable modified bitumen systems and flashing details.

FesCant Plus Cant Strips have at least 35% post-consumer recycled content and comply with the Environmental Protection Agency Regulation 40 CFR Part 248, "Guideline for Federal Procurement of Building Insulation Products Containing Recovered Materials", as a recycled product approved for use on any project using federal funds. FesCant Plus Cant Strips are available in 3", 4", 5" and 5¾" (76, 102, 127 and 146 mm) sizes.

Tapered Fesco Edge Strip

Tapered Fesco Edge Strips are available in standard sizes to meet special needs. They are good for transitioning from membrane to nailer or transitioning from a Tapered Fesco, Tapered E’NRG’Y 2 or Tapered Fesco Foam panel to the roof level. Because of its perlite content, Tapered Fesco Edge Strips offer far greater fire resistance than conventional wood fiber materials.

Tapered Fesco Edge Strips have at least 25% post-consumer recycled content and comply with the Environmental Protection Agency Regulation 40 CFR Part 248, "Guideline for Federal Procurement of Building Insulation Products Containing Recovered Materials", as a recycled product approved for use on any project using federal funds.

Tapered Fesco Edge Strips are available in 6", 12", 18", and 24" (152, 305, 457 and 610 mm) lengths.

*Request for Information / Request a Catalog
 
 
 
To request more information from Johns Manville, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Company type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     






Printable version Bookmark this page Notify a colleague or friend about this pageHome | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.



Copyright © 1996–2008 AECinfo.com