architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Justice Design Group   Lexington  

Lexington - Page 15

   

Lexington

8' to 18' Round Tapered   HERITAGE Series Standards

ANCHOR BASE AND BOLT DETAIL
A
Pole Diameter		 B
Bolt Circle		 C
Bolt Projection		 D
Bolt Size		 E
Conduit Opening		 F
Base Size
5" 7-1/2" to 9-1/4" 3-1/4" 3/4" x 25" 4-3/4" 9-1/4"

THE HERITAGE SERIES MODEL NUMBER SELECTION

The specifier has the choice of selecting one of four standard profiles. The Austin, Bentley, Columbus, or Danforth. The selected profile should be added as a suffix to the model number as A,B,C or D immediately following the H4.

Any of four collar styles may be specified: DC1, DC2, DC3 or DC4. The selected collar style should be added as a suffix to the model number immediately following the standard profile symbol.

Any of the four shaft profiles may be matched with any of the four collar styles to suit the desire of the specifier. See example below.

HERITAGE SERIES ALUMINUM STANDARDS SHAFT PROFILE A,B,C or D - COLLAR DESIGN DC1, DC2, DC3 or DC4

TYPICAL WEIGHT AND ALLOWABLE SIZE OF LUMINAIRES*

DIMENSIONS OF STANDARDS
Nominal Mounting Height Typical Luminaire Weight (lbs.) Effective Projected Area in Square Feet at:   
70 80 90 100 110 Standard    Lexington
MPH MPH MPH MPH MPH Height Top Butt Wall Model Number
10' 150 15.0 11.4 9.0 7.1 5.9 7' 8" 2-7/8" 5" .125" 0708-29504H4
10' 150 21.5 16.4 12.9 10.4 8.5 7' 8" 2-7/8" 5" .188" 0708-29506H4
12' 150 12.3 9.3 7.3 5.8 4.7 9' 8" 2-7/8" 5" .125" 0908-29504H4
12' 150 17.7 13.5 10.6 8.5 7.0 9' 8" 2-7/8" 5" .188" 0908-29506H4
14' 150 10.3 7.8 6.0 4.8 3.8 11' 8" 2-7/8" 5" .125" 1108-29504H4
14' 150 14.9 11.3 8.8 7.1 5.7 11' 8" 2-7/8" 5" .188" 1108-29506H4
16' 150 8.5 6.2 4.6 3.5 2.7 13' 8" 2-7/8" 5" .125" 1308-29504H4
16' 150 12.8 9.6 7.4 5.7 4.5 13' 8" 2-7/8" 5" .188" 1308-29506H4
18' 150 6.6 4.7 3.4 2.5 1.8 15' 8" 2-7/8" 5" .125" 1508-29504H4
18' 150 10.4 7.7 5.7 4.4 3.4 15' 8" 2-7/8" 5" .188" 1508-29506H4
20' 150 5.1 3.5 2.4 1.6 1.0 17' 8" 2-7/8" 5" .125" 1708-29504H4
20' 150 8.2 6.0 4.4 3.2 2.4 17' 8" 2-7/8" 5" .188" 1708-29506H4

* E.P.A. calculations allow for 1.3 wind gust factor.

Variations from standard sizes listed above are available upon inquiry at the factory.

Satisfactory performance of lighting standards are dependent upon the standard being properly attached to a supporting foundation of adequate design. Lexington does not design or offer recommendations for foundations.



Request for Information / Request a Catalog from Justice Design Group
 
 
 
To request more information from Justice Design Group, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.