architecture - engineering - construction
Kemlite Company
Glasbord
Glasbord - Page 14
Glasbord
| PART 2: PRODUCTS 2.01 MATERIALS:
Sanigrid Pultruded Fiberglass Reinforced
Plastic Grid System, manufactured for KEMLITE COMPANY, Joliet, Illinois, U.S.A. Phone
1-800-435-0080 or 1-815-467-8600, Fax: 1-815-467-8666.
| Main Tee |
Part # SG101 |
|
| 4 ft. Cross Tee |
Part # SG102 |
| 2 ft. Cross Tee |
Part # SG122 |
| Wall Angle |
Part # SG103 |
| Junction Clips |
Part # C-2 |
For systems including Glasbord
ceiling panels |
| Part # C-3 |
For systems including
non-frp ceiling panels |
| Connector Clips |
Part # C-1 |
| Hold Down Clips |
Part # C-4 |
For use with ceiling panels up to
1" thick |
| Part # C-5 |
For use with ceiling panels over
1" thick |
| Color: |
Grid Members - manufacturer's
standard white Clips - manufacturer's standard blue |
Sanigrid products shall meet or exceed the following
properties:
- Meets Class A finish requirements: Flame spread of less than
25, smoke developed less than 450 per ASTM E-84 latest version.
- Meets USDA /FSIS requirements.
- Genuine Kemlite Sanigrid identified by a single black thread
embedded in the vertical leg of the tees.
3.01 PREPARATION:
- Ensure that all HVAC, electrical, plumbing and similar work
above the ceiling level has been completed.
3.02 APPLICATION:
- Do all cutting with carbide tipped saw blade.
- Install per manufacturer's printed instructions,
Installation Guide #6244.
Sanigrid, Kemlite, are registered trademarks of Kemlite
Company, Inc. |
