IT Software Modules and Capabilities
IT™ Modeler
IT™ Modeler is software that allows for full 3-D model input. The entire structure, including trusses, walls, foundations, and all framing materials,
is input in complete 3-D. At this point materials, loads, and company information can be input.
Summary:
Input Bearing Members in Full 3-D
Define Truss or Conventional Framing
Input, Edit and Move Header Components
Use Wood or Steel Members, or a Combination
Simpson Strong-Tie® Connectors
IT™ automatically selects, or you can choose from Simpson Strong-Tie’s connectors. Loads, member types and quantities are defined.
Generates Whole Structure Material Take-Off
(with pricing if desired)
A complete bid is generated automatically by IT™, using your inventory and cost parameters.
lT™ Results
IT™ results in a single integrated description of the whole structure
while providing the ability to customize and the flexibility for design
changes. |
System Requirements
Hardware Min. 486 66 MHz
16 MB RAM • 1.44MB Floppy
DOS, or Windows 95
1 MB PCI video adapter
HP Printer support
HPGL/2 PCL5 Language
No Windows NT support
Min 540 MEG HDD
28.8 Modem • SVGA Monitor |
The IT Advantage |
Features |
KEYMARK
"IT" |
Mitek 2000 |
Argos |
DQ2000 |
Enterprise BMS |
Eagle Point (Solid Builder) |
AutoCAD |
3D Modeling of Entire Structure |
YES! |
No |
Yes |
No |
No |
Yes |
Yes |
Internal CAD System |
YES! |
Truss Only |
Yes |
No |
No |
Yes |
Yes |
Truss Design |
YES! |
Yes |
No |
No |
No |
No |
No |
Composite/Proprietary Wood Member Design |
YES! |
No |
No |
No |
No |
No |
No |
Common Framing Member Design |
YES! |
No |
No |
No |
No |
No |
No |
Calculate Member Length |
YES! |
No |
Yes |
No |
No |
Yes |
No |
Wall Frame (Including penalization) |
YES! |
Yes |
Yes |
No |
Yes |
Yes |
No |
Structural Design of Walls (available 3rd quarter 1998) |
YES! |
No |
No |
No |
No |
No |
No |
Cutting Optimization |
YES! |
Truss Only |
Yes |
No |
Yes |
Yes |
No |
Editable Quote Generator |
YES! |
Truss Only |
Yes |
Yes |
No |
No |
No |
Material List Sequencing |
YES! |
Truss Only |
Yes |
Yes |
Yes |
Yes |
No |
Geometric Material Takeoff |
YES! |
No |
Yes |
Yes |
Yes |
Yes |
No |
Window, Door & Trim |
YES! |
No |
Yes |
Yes |
Yes |
Yes |
No |
Electronic Upload of Inventory and Download of Jobs to the
Accounting System |
YES! |
No |
Yes |
Yes |
Yes |
Yes |
No |
Load Development & Analysis of Structure |
YES! |
No |
No |
No |
No |
No |
No |
Comprehensive Hanger Specification |
YES! |
No |
No |
No |
No |
No |
No |
 Lateral Design
|
YES! |
No |
No |
No |
No |
No |
No |
Jointly Marketed By:
Keymark Enterprises Inc.
2905 Wilderness Place, Suite 202
Boulder, CO 80301
fax: 303-443-9054
www.keymark.com
Simpson Strong-Tie Co., Inc.
Pleasanton, CA 94588
800-999-5099
www.strongtie.com
FOR TECHNICAL SUPPORT
call 303-443-8033
© Copyright 1998 SIMPSON STRONG-TIE CO., INC. |
Form F-ITSPEC 7/98 |
