| The Kinetics® Model RIM Floating Concrete
Floor is a roll out system which consists of 2-inch thick high density precompressed
molded fiber glass isolation pads, separated by low density acoustical fiber glass. The
density and spacing of the fiber glass isolation pads are factory engineered to provide
uniform deflection of the floating floor under a wide range of design loadings. A sound transmission class of STC 73 was achieved at Riverbank Acoustical
Laboratories with Kinetics® Model RIM Floating Floor System illustrated. This
performance is sufficiently high in that additional sound transmission loss would be
required only in very extreme situations. Mechanical equipment noise, loud musical
instruments and industrial noise can all be significantly attenuated with a Kinetics
Floating Concrete Floor.
An impact insulation class rating of IIC 70 was also achieved with
the Kinetics® Model RIM Floating Concrete Floor. This performance will isolate
all but the most severe impact sources. pedestrian footfalls and similar impact sources
are rendered virtually inaudible below the isolated floor.
Kinetics Noise Control provides factory engineering
and full installation drawings. Factory supervision and factory installation are
available.
|
