architecture - engineering - construction
Kinetics Noise Control Inc.
Architectural Noise Control Solutions
KINETICS Sound Barrier Products
Architectural Noise Control Solutions
| KINETICS® Sound Barrier Products |
| Many occupied spaces are constructed using lightweight
material, and noise problems occur later. Noise can travel over partitions. Noise can
travel through mineral fiber ceiling tiles. Kinetics has developed products to help combat
these occupied space disturbances. Kinetics
Cross Talk Barrier - Type KNM-100AL/AL
| Kinetics Cross-Talk KNM 100AL/AL is a Loaded Vinyl Limp Mass Barrier with reinforced aluminized facing
encapsulating the barrier giving the product a Class 1 fire rating. Specifications: Barrier material shall meet the sound transmission loss
listed below. The barrier material shall be tested in accordance with National Fire
Protection Association method NFPA 701 and tested in a vertical configuration. Test
results shall meet a Class 1 fire rating. Barrier material shall be non-lead, resistant to
water, oils, weak acids, alkalies, and fungi. Barrier material to be Model Cross-Talk KNM
100AL/AL by Kinetics Noise Control of Dublin, OH.
|
|
| Kinetics Ceiling Backer KNC Ceiling Backer is a composite die cut barrier available in 2' x 2' or 2'
x 4' sizes. These sizes can easily be placed on top of an existing ceiling tile system
that is not providing enough sound attenuation. The barrier material will be a reinforced
aluminized-faced mass loaded vinyl 1.0 lb./sq. ft. density bonded to a 1" fiber glass
decoupler. The sound transmission loss characteristics are as follows:
|
 |
|
