architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Knape & Vogt Manufacturing   Furniture & Cabinet Hardware\Fittings & Specialty Hardware Product Section  

Fittings & Specialty Hardware Product Section - Page 10

   

Furniture & Cabinet Hardware\Fittings & Specialty Hardware Product Section

Ezy-Roll Aluminum Track
transparent.gif (810 bytes)

Ideal for lightweight sliding glass doors. Track is manufactured from anodizied, corrosion free aluminum, with nylon or ball bearing steel rollers.

S P E C I F I C A T I O N S

fitspc10a.jpg (8024 bytes)
1083
number 1083 ANOD
description Upper T guide for wood framed installations.
dimensions 3/4" wide x 9/16" high
stocked 12' length
fitspc10b.jpg (7776 bytes)
1093
number 1093
description Double channel for tops, bottoms, and ends.
dimensions 1-3/16" wide x 9/16" high
stocked 12' length
fitspc10c.jpg (8723 bytes)
1095
number 1095
description Shoe for 1/4" glass. Rollers to be inserted in bottom.
dimensions 1" high
stocked 12' length
fitspc10d.jpg (8346 bytes)
1096
number 1096
description Single track. For single doors or may be used with 1093 double channel for covered installation.
• NOTE: Cut glass 1-1/2" lower than opening when using 1096/1093 track assembly.
dimensions 31/64" wide x 15/32" high
stocked 12' length
fitspc10e.jpg (8435 bytes)
1099
number 1099
description Double track.
• NOTE: Cut glass 1-3/16" lower than opening when using 1099 track.
dimensions 1-1/16" wide x 1/4" high
stocked 12' length

fitspc10f.jpg (7912 bytes)
1085
number 1085 VINYL
description Vinyl guide fits over top of glass for noiseless operation in upper channel.
size 7/8" long
packaged 100 per box

fitspc10g.jpg (6774 bytes)
1087
number 1087 RUB
description Rubber bumper installs in jambs to cushion glass.
packaged 100 per box
number 1097 NYLON
description Nylon roller press fits into bottom of 1095 shoe.
packaged 100 per box
fitspc10h.jpg (7698 bytes)
1097/1098
number 1098 ZC
description Steel ball bearing roller press fits into bottom of 1095 shoe.
packaged 20 per box
COMPLETE ASSEMBLY

fitspc10i.jpg (11448 bytes)
1092

fitspc10j.jpg (8679 bytes)
1096/1093
Track Assembly
transparent.gif (810 bytes)
number P1092 ANOD
includes 1 each – 1093 upper channel
4 each – 1097 rollers
4 each – 1085 vinyl guides
2 each – 1095 shoe
1 each – 1099 lower track

stocked

 3', 4', 5', and 6' lengths
INSTALLATION NOTES/RECOMMENDATIONS:
• Knape & Vogt does not recommend butt-joints and/or openings longer than 12 feet.
• Knape & Vogt recommends that the height to width ratio for glass doors should not exceed 2:1.



Request for Information / Request a Catalog from Knape & Vogt Manufacturing
 
 
 
To request more information from Knape & Vogt Manufacturing, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.