Designed for
single sliding glass door installations. Zinc plated steel track has full ball
bearing carriers. Can be modified to handle triple door installations.
S P E
C I F I C A T I O N S
893
number
893 ZC
description
Single track channel guide. Use for top and
ends of opening. Turned-back edges hold glass vertical.
dimensions
15/32" wide x 5/8" high
stocked
12' length
899
number
899 ZC
description
Balls ride freely on curved anvil with no
contact against sides of lower track.
dimensions
1/2" wide x 1" high
stocked
12' length
995
number
995 ZC
description
Shoe for 1/4" glass – scant or
full. Lightly curved bottom for free rolling position on ball bearings.
dimensions
7/16" wide
stocked
12' length
997
number
997 ZC
description
Ball bearing carrier has free rolling balls
on 3" centers. Unique design creates noise less two point suspension between shoe and
lower track.
stocked
12' length
956
number
956 SS
description
Stainless steel channel for 1/4" glass,
plywood or hardboard.
dimensions
5/16" high
stocked
12' length
NOTE:
For each foot of opening, use: 1' of upper channel and lower track and shoe (plus 1"
per door for overlap), with 1-1/2' of carrier (1-1/2 times door width for each door).
Glass is cut 1-1/4" lower than height of opening.
COMPLETE ASSEMBLY
number
892 ZC
includes
1 each – 893 channel guide
1 each – 995 shoe
1 each – 997 carrier
1 each – 899 lower track
size
12' length
TRIPLE DOOR
description
Three door openings can be fitted with a
combination of 892 (above) and 992 (page 11) complete
assemblies. Both assemblies should be ordered for the full width of the opening.
