Set the standard for High Quality block.
Be an HQ producer.

Krete HQ (S), the new multi-property admix, has revolutionized zero-slump concrete products. One economical dose assures consistent quality - batch-to-batch and unit-to-unit - by providing a host of important, high quality performance properties built right in:

Plasticizing Action
Krete HQ (S) dramatically speeds up feed time in machine production by up to one-half second per cycle for higher production - with as much as 30 minutes more production per eight-hour shift. Because Krete HQ (S) adds green strength, you'll see sharper corners and edges in every unit. Designed to produce swipe, Krete HQ (S) creates tighter texture.

Lower Forgiving Absorption
Units produced with Krete HQ (S) are less absorptive, but can "take-up" excess moisture. This means one coat is enough for most painted projects.

Densification for Strength
Krete HQ (S) features a built-in densifier that increases compressive strength, especially early strength at the cuber and at the splitter. This is particularly important for architectural masonry units.

Efflorescence Control
Your units will look better longer because Krete HQ (S) is specially designed to minimize both primary and secondary efflorescence. Units produced with Krete HQ (S) dry-out more quickly after a rain. And colored units stay brighter.

Quality That's Affordable, Too
One low, economical dose of Krete HQ (S) gives you all these benefits -plasticizing action, efflorescence control, densification and lower absorption. In most cases, the minimal costs of using Krete HQ (S) are offset by the gains in higher production.

The Competitive Edge
In today's highly competitive market, successful producers focus on total customer satisfaction. In light of growing demands for quality, as well as an emphasis on cost control, you can't afford to be without Krete HQ (S).

See for yourself the Krete HQ (S) quality difference. Contact us at.

3425 N. 124th Street     Brookfield, Wisconsin 53005
Toll-Free: 800-777-9562     Fax: 414/783-6470

THIS PRODUCT IS NOT INTENDED FOR AND SHALL NOT BE USED FOR WATER REPELLENCY PURPOSES.