LAKOS Separators and Filtration Systems
Lakos Separators
Lakos Separators - Page 11
Lakos Separators
The actual flow rate of your system is key to proper model selection. Internal accessibility enables the removal of unusually large or difficult solids and provides for internal coatings to protect against corrosive/aggressive liquids/solids. Satisfying all the material and manufacturing requirements of the American Society of Mechanical Engineers, LAKOS also offers A.S.M.E Code construction. Additional specifications and options are as follows: Maximum Pressure Rating:150 psi (1055 kpa); higher pressures also available Pressure Loss Range: 4.5-12 psi (32-85 kPa) Inlet/Outlet Flanges:150 lb.,ANSI, Raised Face; also available with DIN flanges, BSP pipe threads and other types. Material Specifications: Standard carbon steel; also available in stainless steel, cupro-nickel, fiberglass-reinforced polyester (FRP), Monel clad steel, AR (abrasion-resistant), titanium, low-alloy steel, industrial-grade PVC plastic (KXL Series) and U.S.D.A. approved materials. Consult factory for special requirements. Special Coatings: Epoxy, Scotchkote, Kanigen nickel, Techthane. Process Treatments: Electropolished, electroplated, heat-treated, sand blasted (unpainted), primer only. Other Options: Low or vertical profiles, exterior modifications, high pressure construction, packaged/multistage/skid systems and more. PREP Systems:Complete separation/solids transfer/solids-handling packages with proper support stands, flanged spools, pressure gauges and selected spare parts for the automatic purge valve.
|





