The following criteria determine the suitability of any filter for a given application. Use these to judge LAKOS versus anything else under consideration.

Particle size removal

LAKOS Separators are proven capable of 5-75 micron performance. Excellent pre- filter to finer filtration requirements and fluid treatment systems

Flow range

LAKOS Separators feature individual units for 3 U.S.gpm (0.7m³/hr) up to 12,750 U.S.gpm (2895 m³/hr). Easily manifolded for even higher (or variable) flow rates.

Pressure loss

LAKOS Separators operate continuously (no fluctuations) at a steady pressure loss of only 4.5-12 psi(32-84 kpa). Compare to screens and barrier filters, which build-up to very high pressure losses.

Liquid loss and solids handling

LAKOS Separators require no excessive backwashing. Low- flow periodic purging or a controlled bleed technique can achieve zero liquid loss. Selected solids collection options ensure minimum waste and easy disposal/ recovery.

Replacement parts

LAKOS Separators have no moving parts to wear out and no filter elements or liners to clean or replace.

Maintenance requirements

LAKOS Separators maybe purged of separated solids without system interruption. Easily automated for no maintenance routine. No filter cleaning. No duplicate equipment needs.

Space requirements

LAKOS Separators are compact. Larger models may be specified at low or vertical profile and/or with alternate inlet/outlet configurations to accommodate limited space or piping needs.

Engineering  and tech support

LAKOS Separators can be easily retrofit to most systems. Complete system packaging is available. Customer specifications are welcome. Application and product engineering is staffed for immediate customer needs.