architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Lane International Corp.   Manhole Steps and Ladders  

Ez Lift Pins - Page 9

   

Manhole Steps and Ladders

NEW! EZ LIFT PINS

Save time, money, and promote safety with simple method. Use the EZ LIFT PINS and watch production increase and costs decrease.
  • LOW COST pins remain in the manholes
  • EASY handling with the forklift adapter
  • SAFE- each set of pins is designed to lift standard 48" & 60" manhole products
  • No more patching holes in the field as the EZ LIFT PINS don't extend through the wall of the manhole
  • Works on all manhole products, catch basins and miscellaneous precast products
  • No special handling equipment needed, and the forklift operator never leaves his seat
  • Lift pin mechanisms are available
  • Passes vacuum tests with ease
  • Pin is driven into a 1-1/2" x 3-3/4" deep hole after concrete is cured to a 300OPSI minimum
  • The polypropylene material conforms to ASTM D-4101 specifications
  • Pins are injection molded around a 1" Diameter Grade 60 reinforcing bar
Ez Lift Pins
Ez Lift Pins
MANUFACTURED BY:
LaneINTERNATIONAL
CORPORATION

PO Box 925
18067 SW Lower Boones Ferry Road
Tualatin, Oregon 97062
Phone: (503) 684-0077
Fax: (503) 684-0078

CALL (800) 666-0076 TODAY FOR MORE INFORMATION!



Request for Information / Request a Catalog from Lane International Corp.
 
 
 
To request more information from Lane International Corp., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.