Larsen Products - Page 7

FIRE EXTINGUISHER CABINETS

HOW TO SPECIFY AND ORDER LARSEN'S FIRE EXTINGUISHER CABINETS

1. Fire Extinguisher Cabinets

2. Combination Extinguisher & Fire Dept. Valve Cabinets

3. Combination Extinguisher & Fire Blanket Cabinet

4. Fire Hose & Valve Cabinets

5. Fire-Rated Option for Extinguisher, Valve, and Fire Blanket Cabinets 

1. Fire Extinguishers

2. Fire Dept. Valve

3. Fire Blanket

1. Fully Recessed

2. Semi-Recessed

3. Trimless

4. Surface-Mounted

NOTE: Semi-recessed and surface-mounted cabinet compliance with ADA wall projection guidelines depends on several location and installation issues.

1. Steel: Cold-Rolled, Baked Acrylic Enamel Finish

2. Aluminum: Satin, Finish, Clear or Color Anodized

3. Stainless Steel: 304 #4 or #8 Finish

4. Solid Brass

5. Solid Bronze

1. Architectural Door Styles
2. Gemini
3. Cameo
4. Occult
5. Vista & Rota

THREE PART SPECIFICATION GUIDE

SECTION 10522

FIRE EXTINGUISHERS, CABINETS, AND ACCESSORIES

PART 1: GENERAL

1.01 WORK INCLUDED

1. Fire Extinguishers

2. Cabinets

3. Accessories

1.02 RELATED WORK

1. Section 09900 - Field Painting

2. Section 15375 - Standpipe and Hose Systems

1.03 REFERENCES

1. NFPA 10 - Portable Fire Extinguishers

2. ADA Accessibility Guidelines

1.04 QUALITY ASSURANCE

1. Conform to NFPA 10 requirements for portable fire extinguishers.

2. Provide fire extinguishers, cabinets, and accessories by single manufacturer.

1.05 SUBMITTALS

1. Submit brochure and product data in compliance with Section 01340.

PART 2: PRODUCTS

2.01 ACCEPTABLE MANUFACTURERS

1. Where shown on the drawings, provide fire extinguishers, cabinets, accessories manufactured by Larsen's Manufacturing Co. 7421 Commerce Lane N.E., Minneapolis, MN 55432 (612) 571-1181.

2.02 FIRE EXTINGUISHERS

1. Water Type: Larsen's PW Series
2. Dry Chemical type: Larsen's MP or DC Series
3. Carbon Dioxide Type: Larsen's CD Series

2.03 FIRE EXTINGUISHER CABINETS

1. Where indicated on drawings, provide Larsen's _________ Series, model number _______ with _________ door. Door and trim to be fabricated from (cold-rolled steel, aluminum, stainless steel, solid brass or solid bronze). Special painted surfaces, color anodized aluminum, and graphics an indicated.
2. Provide cabinets with fire-rated option, if applicable (see pg. 6).

2.04 ACCESSORIES

1. Fire Blankets and Cabinets
2. Vigilante Cabinet Alarm
3. Extinguisher Brackets

PART 3: EXECUTION

3.01 INSPECTION

1. Verify that rough openings for cabinets are correctly sized and located.
2. Verify servicing, charging and tagging of all fire extinguishers.

3.02 INSTALLATION

1. Install the items of this Section in strict accordance with the original design, approved shop drawings, and requirements of agencies having jurisdiction, as approved by the Architect, anchoring al components firmly into position.

END OF SECTION