 |
FIRE HOSE AND VALVE CABINETS |
OCCULT SERIES
GENERAL
DESCRIPTION: The Occult Series features a uniquely attractive
door which completely covers all exposed portions of the cabinet, and
its concealed hinge permits the door to open 180°. This exceptional door
and hinge design combine to give the Occult a trimless appearance. Although
the 3/4" flange, extending around the box, is outside of the wall,
it is completely covered
when the door is closed.
BOX SPECIFICATION: All
Occult units have a cold-rolled steel box. The standard color is matte black. All boxes
for standard units have a 3/4" wide flange. All fire-rated, Flame-Shield Occults have
a 1-1/2" wide flange. The O-4016 is furnished with a heavy gauge steel shelf,
12" up from the bottom of the box, leaving approximately 28" of available
extinguisher height.
DOOR SPECIFICATION:
The Occult door is 3/4" thick in either the standard steel or optional aluminum or
stainless steel. It is available only with a solid or vertical due design. The steel door
is cold-rolled steel with a standard finish of white baked acrylic enamel, which can be
used either as a finish or prime coat. The aluminum door has a satin anodized finish.
Clear anodized is standard and a wide selection of optional color anodized finishes is
available. To specify the aluminum door, use the prefix "AL" before the model
number. The stainless steel door is #4 finish, 304 stainless steel. To specify the
stainless steel door, use is #4 finish, 304 stainless steel. To specify the stainless
steel door, use the prefix "SS" before the model number. All Occult doors come
with a satin finish pull handle with a self-adjusting roller catch. If desired, the pull
handle can be deleted. The concealed hinge is constructed of aluminum with a stainless
steel pin. Some of the more popular Occult door styles are illustrated below; however, the
full selection is outlined in the chart below.
TO SPECIFY THE OCCULT
SERIES:
Use the appropriate prefix
for the trim and door material. If STEEL -- no prefix is required. If aluminum - use
"AL". If stainless steel - use "SS". If brass - use "B". If
bronze - use "BZ". Contact factory if door is to be #8 stainless steel.
Select the required model
number from the table below.
Select the door style (Solid
or Vertical Duo) and if desired, the optional die cut lettering (see page
23).
If Vertical Duo door is
specified, select the required door glazing and options from the table below. (DSA glass
is standard).
| NOTE:"FS"
models denote Larsen's "Flame-Shield" fire-rated
cabinets. When specifying Larsen's "Flame-Shield" fire-rated cabinets option for
the Occult Series, refer to the dimension chart above and select from the models with an
"FS" prefix. No knock-outs are provided with fire-rated valve cabinets. Pipe
holes must be drilled by installer and complete instructions are supplied with each
fire-rated valve cabinet. |
DIMENSIONS
| |
Model Number |
Inside Box Dimensions
H x W x D |
Outside Flange Dimensions H x W x D |
Outside Door Dimensions H x W |
Rough Opening
H x W x D |
Knockout Locations |
Interior Capacity |
| E |
F |
G |
| |
O-1818 |
18x18x8-1/2 |
19-1/2x19-1/2 |
19-3/4x19-3/4 |
18-1/2x18-1/2x8-3/4 |
9" |
-- |
4" |
One Fire
Dept. valve w/cap & chain |
| FS |
O-1818 |
18x18x8-1/2 |
21x21 |
21-1/4x21-1/4 |
20x20x9-1/2 |
--- |
-- |
--- |
| |
O-4016 |
40x16x8-1/2 |
41-1/2x17-1/2 |
41-3/4x17-3/4 |
40-1/2x16-1/2x8-3/4 |
--- |
6" |
4" |
One Fire Dept. valve
w/cap & chain & a Fire Ext. |
| |
O-3232 |
32x32x8-1/2 |
33-1/2x33-1/2 |
33-3/4x33-3/4 |
32-1/2x32-1/2x8-3/4 |
4" |
4" |
4" |
One hose rack unit
with 100' of rack hose & a Fire Ext. |
NOTE: Consult Occult Series Fire
Extinguisher Cabinets
Door Style:
- Solid
- Vertical Duo
- Vertical Duo Break Glass
Lettering Color:
Lettering Style:
- Vertical
- Horizontal
- Type A
Door Glazing & Options:
- DSA Glass (Standard)
- Plate Glass
- 1/8" Acrylic
- 1/4" Acrylic
- Clear Wire
- Tempered Glass
- Safety Glass
- Solar Gray
- Solar Bronze
| NOTE:
All Occult Series cabinets comply with ADA wall
projection guidelines |
|
