 |
DETENTION ACCESS PANELS |
L-DPH / L-DPM
HIGH SECURITY
GENERAL DESCRIPTION
L-DPH : These heavy duty panels should be used in
high security areas. The L-DPH comes prepared for bolt-in applications or with
masonry anchors. The option security clips can be added for additional strength and
security.
SPECIFICATION
FRAME : One
piece, 10 gauge steel frame - 2-1/2" deep x 2" wide x 9/16" return
DOOR: 10
gauge steel
HINGE:
Exposed continuous type
Options:
1. Exposed
weld-on butt hinges
2. Removable
door is available when security screws are used in lieu of hinges
FASTENERS:
Security screws
FINISH: Rust
inhibitive primer
ANCHORS:
Frame prepared for bolt-in application or optional masonry anchors
LOCKS:
Detention or security locks can be supplied or panels prepared for locks supplied by
others.
SIZES: All
sizes available as standard.
GENERAL DESCRIPTION
MEDIUM SECURITY
L-DPM: The L-DPM access
panels are manufactured to be installed in security areas where an exposed flange frame is
acceptable. These access panels can be mounted in stud walls or masonry partition in
either new or existing walls and ceilings.
SPECIFICATION
FRAME: One
piece, 12 gauge steel frame-2-1/2" deep x 2" wide x 9/16" return.
DOOR: 12
gauge steel
HINGE:
Exposed continuous type
Option
1. Removable
door is available when security screws are used in lieu of hinges
FASTENERS:
Security screws
FINISH: Rust
inhibitive primer
ANCHORS:
Frame prepared for bolt-in application or optional masonry anchors
LOCKS:
Detention or security locks can be supplied or panels prepared for locks supplied by
others.
SIZES: All
sizes available as standard
CALL 1-800-LARSENS / FAX (612) 571-6900 |
