 |
TWO NEW CABINET
OPTIONS |
FIRE-RATED
DETENTION CABINETS-FLAME-SHIELD® Option
| GENERAL DESCRIPTION: Larsen's
new Flame-Shield fire-rated cabinet option is available for a variety of
detention fire extinguisher cabinets and detention fire department valve cabinets. It is
designed specifically to maintain the integrity of one and two hour fire walls with
recessed cabinets. Warnock-Hersey has certified and listed Larsen's Flame-Shield option
for one and two hour combustible and non-combustible wall systems to meet the requirements
of UBC Standard 43-6(ASTM E-814). Larsen's Flame-Shied option
assures the specifier that life safety codes will be maintained and by eliminating the
need to continue the fire wall within the rough opening, saves the contractor considerable
time and expense. |
|
| For
complete details of Larsen's Flame-Shield option, please refer to page 3 of our Sweet's
brochure #10520/LAR or contact factory. |
HORIZONTAL DUO DOOR
PANELS
Larsen's new Horizontal Duo
Door Panel enables the end-user to inspect periodically the interior contents of the fire
protection cabinets without unlocking the door. The viewing window is glazed with
1/2" clear coated polycarbonate sheet, which normally will not shatter when struck by
thrown objects. This polycarbonate sheet meets the impact strength requirements on ANSI
Z97.1 and the CPSC Architectural Glazing Material Safety Standard (16 CFR 1201). It also
meets the requirements for a burglary-resistant glazing material when tested in accordance
with Standard No. 972 of Underwriters' Laboratories. All glazing is secured into the
cabinet door with heavy gauge angle and removable locking nuts.
The Horizontal Duo Door Panels
can be specified on all Larsen's Detention Cabinets and will not interfere with any lock
options.
To specify Horizontal Duo Door
Panels, add door description after the model number.
EXAMPLE: |
FS DEC
2712-R
|
Horizontal Duo Door
Panel
|
|
MODEL NO. |
DOOR DESCRIPTION |
 |
DETENTION ACCESS PANELS |
HIGH SECURITY (L-DPH)
DESCRIPTION: These
heavy duty panels should be used in high security areas. The L-DPH comes prepared for
bolt-in applications or with masonry anchors. The optional security screws can be added
for additional strength and security.
SPECIFICATION:
FRAME - One
piece,10 gauge steel frame - 2-1/2" Deep x 2" Wide x 9/16" Return.
Door - 10
gauge steel.
HINGE -
Exposed Continuous Type. Options: 1. Exposed weld-on butt hinges 2.
Removable door is available when security screws are used in lieu of hinges.
FASTENERS - Security
screws.
FINISH- Rust
inhibitive primer.
ANCHORS - Frame
prepared for bolt-in application or optional masonry anchors.
LOCKS -
Detention or security locks can be supplied or panels prepared for locks supplied by
others.
SIZES - All
sizes available as standard.
APPLICATION
MEDIUM SECURITY
(L-DPM)
DESCRIPTION: The
L-DPM access panels are manufactured to be installed in medium security areas where an
exposed flange frame is acceptable. These access panels can be mounted in stud walls
or masonry partition in either new or existing walls and ceilings.
SPECIFICATION:
FRAME - One
piece, 12 gauge steel frame - 2-1/2" Deep x 2" Wide x 9/16" Return.
Door - 12
gauge steel.
HINGE -
Exposed Continuous Type. Options: Removable door is available when
security screws are used in lieu of hinges.
FASTENERS - Security
screws.
FINISH- Rust
inhibitive primer.
ANCHORS - Frame
prepared for bolt-in application or optional masonry anchors.
LOCKS -
Detention or security locks can be supplied or panels prepared for locks supplied by
others.
SIZES - All
sizes available as standard.
APPLICATION
Larsen's has a complete line of fire extinguishers,
fire department valves and hose rack unit components.
Please refer to page 5 and 19 of our Sweet's brochure
#10520/LAR or contact factory for more information. |
