Laticrete Product Selection Catalog Page - 9

EPOXY ADHESIVES

LATAPOXY^® 300 EPOXY ADHESIVE

DESCRIPTION:
A high strength 100% solids epoxy adhesive. For chemical resistant installations of quarry tile, brick, and packing house tile. Also ideal for installing natural and agglomerated thin marble and granite tiles.

ADVANTAGES:
Prevents curling of water-sensitive marbles and agglomerates. Will not stain white or light colored !narbles. May also be used to install rubber and wood flooring. Can be used for interior and exterior installations.

LATAPOXY^® 210 EPOXY ADHESIVE

DESCRIPTION:
High-strength epoxy portland cement adhesive. Designed for tile and stone installations over sound, clean surfaces such as concrete, block, brick, exterior grade plywood (interior only), steel, vinyl tile, and asphalt tile.

ADVANTAGES:
Safe, odorless, non-flammable, water cleanable while fresh, resistant to dilute chemicals, salts, and cleaning agents.

REFER TO DATA SHEET 630.0
FAX ON DEMAND: 6300

MEETS ANSI A118.8

PACKAGING:
Each unit contains resin, hardener and powder.
Grey, Black and White packaged in:

Single Unit-
Makes 2.5 U.S. gallons (9.5 l) of mortar; 48 pails per pallet
Double Unit-
Makes 5 U.S. gallons (19 l)of mortar; 27 cartons per pallet
Industrial Unit-
Makes 25 U.S. gallons (95 l) of mortar; 5 units per pallet

COVERAGE:
Single unit makes approximately 2.5 U.S. gallons (9.5 l) of adhesive and will install approximately:

80-90 ft² (7.5-8.5 m²) of ceramics, mosaics and wall tile using a 1/8" x 1/8" (3 mm x 3 mm) square notch trowel;

40-50 ft² (3.5-4.5 m²) of quarry tile using a 1/4" x 1/4" (6 mm x 6 mm) square notch trowel and;

30-40 ft² (2.5-3.5 m²) of large tile and stone or decorative tile with lugs using a 1/4" x 3/8" (6 mm x 9 mm) square notch trowel.