 |
Crescendo 11" |
1 T5 - Indirect |
| PHOTOMETRY (Meets RP-1) |
 |
| Report# |
2100548 |
| Efficiency |
87.4% |
| Peak Candela Value |
679 @ 127.5° |
| Peak: Zenith Ratio |
1.4:1 |
CANDELA DISTRIBUTION
| Vert. Angle |
Horizontal Angle |
Zonal
lumens |
| 0 |
22.5 |
45 |
67.5 |
90 |
| 0 |
0 |
0 |
0 |
0 |
0 |
|
| 5 |
0 |
0 |
0 |
0 |
0 |
0 |
| 15 |
0 |
0 |
0 |
0 |
0 |
0 |
| 25 |
0 |
0 |
0 |
0 |
0 |
0 |
| 35 |
0 |
0 |
0 |
0 |
0 |
0 |
| 45 |
0 |
0 |
0 |
0 |
0 |
0 |
| 55 |
0 |
0 |
0 |
0 |
0 |
0 |
| 65 |
0 |
0 |
0 |
0 |
0 |
0 |
| 75 |
0 |
0 |
0 |
0 |
0 |
0 |
| 85 |
0 |
0 |
0 |
0 |
0 |
0 |
| 90 |
0 |
0 |
0 |
0 |
0 |
|
| 95 |
17 |
93 |
8 |
1 |
0 |
54 |
| 105 |
81 |
250 |
407 |
471 |
437 |
343 |
| 115 |
163 |
269 |
483 |
601 |
638 |
436 |
| 125 |
246 |
301 |
487 |
641 |
670 |
421 |
| 135 |
321 |
356 |
428 |
553 |
617 |
351 |
| 145 |
385 |
407 |
443 |
484 |
504 |
280 |
| 155 |
435 |
447 |
467 |
486 |
492 |
214 |
| 165 |
469 |
475 |
481 |
488 |
490 |
136 |
| 175 |
486 |
487 |
489 |
490 |
490 |
48 |
| 180 |
490 |
490 |
490 |
490 |
490 |
|
COEFFICIENTS OF UTILIZATION (%)
| Ceiling Wall
RCR |
80 |
70 |
50 |
0 |
| 70 |
50 |
30 |
10 |
70 |
50 |
30 |
50 |
30 |
10 |
0 |
| 0 |
83 |
83 |
83 |
83 |
71 |
71 |
71 |
48 |
48 |
48 |
0 |
| 1 |
75 |
75 |
69 |
66 |
64 |
61 |
59 |
42 |
40 |
39 |
0 |
| 2 |
68 |
62 |
58 |
53 |
58 |
53 |
50 |
36 |
34 |
32 |
0 |
| 3 |
62 |
55 |
49 |
44 |
53 |
47 |
42 |
32 |
29 |
27 |
0 |
| 4 |
57 |
48 |
42 |
37 |
48 |
41 |
36 |
28 |
25 |
22 |
0 |
| 5 |
52 |
43 |
36 |
31 |
44 |
36 |
31 |
25 |
22 |
19 |
0 |
| 6 |
47 |
38 |
31 |
27 |
40 |
32 |
27 |
22 |
19 |
16 |
0 |
| 7 |
44 |
34 |
27 |
23 |
37 |
29 |
24 |
20 |
16 |
14 |
0 |
| 8 |
40 |
30 |
24 |
20 |
34 |
26 |
21 |
18 |
15 |
12 |
0 |
| 9 |
37 |
27 |
21 |
17 |
32 |
24 |
19 |
16 |
13 |
11 |
0 |
| 10 |
34 |
25 |
19 |
15 |
29 |
21 |
16 |
15 |
11 |
9 |
0 |
Based on a floor reflectance of 0.2
SPECIFICATIONS
Housing:
6063 T5 extruded aluminum.
Optical system:
Optical system constructed of highly specular aluminum to
produce an indirect distribution.
Row ends:
Mitered aluminum extrusion sculptured end caps.
Joints & Intersections:
All joints shall be accomplished using TwinLock™
joining system. Optional intersections in "L", "T", or "X"
configura-tions, shall be mitered aluminum extru-sion.
Mounting:
All mounts shall have tamper proof infinite vertical
adjustment capability. Mounts shall be independently certified up to Zone 4 seismic
requirements and able to accept loads up to 1000lb.
Electrical:
All luminaire sections shall be factory pre-wired to
section ends, utilizing segregated raceways. Optional quick connect plugs are available.
Ballast:
Electronic: rapid start or dimming.
Approvals:
Certified to UL & CSA standards.
Finish:
Thermosetting polyester, electrostatically applied meeting
AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of
colors. Medium gloss finish as standard.
©1998
Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1
Phone: 604-888-6811 Toll
Free Fax: 1-800-665-LEDA (5332) Email: info@ledalite.com
WWW: http://www.ledalite.com
Note: Specifications subject
to change without notice. |
